Very bizarre internet access question by Gordon

More Threads

• Networking a printer
  • Howdy. I need some basic help for dummies here. I have a desktop. It has 2 printers. A parallel port Epson and a USB Canon Pixma IP4000. Each printer has sharing enabled (Printer 1 and Printer 2) I have 2 laptops. I have no problem printing to the Epson. I now want to add the Canon. How do I do this? Also, I no longer have the CD that came with the Canon. But I'm sure the driver is somewhere on my desktop. I can't find it. I searched C drive (using *.drv) but nothing looks correct. There must be a menu that shows the name/location of the driver? I am not sure how to proceed. Mel
• Access oddity - right newsgroup?
  • I just got a cable ISP (Comcast) a few days ago, and find some weirdities going on. After solving some of them I have a real puzzler. I can be going along just fine, surfing the internet, reading a newsgroup, checking email - when out of nowhere my dial-up will dial up! Not having all the bugs out nor the email all set, I haven't stopped dial-up yet. But I'd really like to find out what keeps dialing the land line. I seem to be able to run on both at once - sort of. I found my anti-virus program was updating awful slowly. I looked at the sys tray and had a phone connection running?! Same with something on my browser. It got slow and I found the dial-up connected. I don't even know where to look or for what. Altho I seem to recall some place seeing a Never Dial setting. Haven't found where. Thanks for any help. -- JimL
• Broadcom cards continually re-negotiating, showing short?
  • I have a network with 13 HP DC5750 desktops. Almost all of them are exhibiting a strange behaviour. They drop the network connection for a few seconds, and then reconnect. In the event log, I see this event repeatedly: 'Broadcom NetXtreme Gigabit Ethernet: Network controller configured for 100Mb full-duplex link' On some machines, it does not happen too often, once every week or so. But on some, it is happening once an hour, and even once every few minutes sometimes. Also, when I run the Broadcom Diags, and run cable test, it shows that 2 of the 4 pairs have a short. At first, I thought, AHA!, that's the problem. But now it seems suspicious, because all my computers are showing 2 shorted pairs. While it is possible, I doubt that they are all shorted. Has anyone else seen this happen? I'm going to try new cables to make sure, but beyond that, this seems pretty weird to me. Maybe it's the cheapo Linksys switch they are plugged into? Or maybe there are Gremlins chewing on my cables at night? Many of the events are registering after midnight.... :)
• new to xp.. know nothing!!
  • had Window 2000, installed Window xp. firstly, I cannot get on the internet (AOL is my ISP) secondly, I therefore cannot register/activate my xp. where to go from here? can I register/activate on another computer in the house? 1 runs xp and the other runs 2000?
• facebook and Windows Live Writer and Blog slow typing into blog
  • I used Windows Blog today and the typing into a blog online is very slow to appear in the webpage. I may have to wait up to 20 seconds after typing before the webpage lets me type again. The whole webpage freezes. The same happens when I type into Facebook and this never happens doing any other task on this computer. What could be causing this? At one point I changed something that showed port 445 but I can not find that now. Windows Live Email and other Windows Live applications. This does not seem to be happening here at Microsoft Groups and I think it did not used to happen before when I used Windows Live Writer and blog...but I may have forgotten. Someone has already suggested using Firefox but love love love Windows Live applications and the great services available online. A beneficiary as myself likes the applications much. -- ...scribble scribble scribble...
• XP firewall Domain Profile leaves 2nd wireless nic wide open?
  • Hello, I am researching on using winxp firewall. My question is that when a user is connected to the domain and the xp fireall domain profile is in use. (Our case the firewal domain profile disables the firewall) Will it also disable the firewall on all other nics on a laptop?? For example we have laptop users that leave their wireless nic on when docking back in the office and then join the domain through the wired nic on the doc. They can easily connect to other wireless networks since we are in a big city while the firewall domain profile is enabled. Does that mean that the wireless nic has no firewall enabled also? Or is XP firewall smart enough to know that the wireless nic cant find the domain controller for our network and the firewall stays on for that wireless nic while the other wired nic that did find the domain controller fw gets disabled? If not anyone know something that would adress this.
• File Sharing on Home Network
  • Hello! Friends: My OS is XP-Pro. My home network was working fine until a full malware scan was done on my pc. After which, other PCs in my home network can't share the files in my pc. They got this message: "not enough server storage to process this command." Can anyone help? Much appreciated. Lee
• Browsing on Some Computers on My Network
  • Two of the PCs on my home network lose their browsing connections after I log onto the Internet. Both are configured with Windows XP SP 3. Both detect on my network management software (Network Magic) as being connected and working perfectly; however, when I open any browser (IE, Firefox, Google Chrome), I initially connect to a Web page but then cannot continue browsing, as further links do not work. After the initial page, I lose the link. Consistently, I find that I can reboot the system and open the browser again, but the loss of network connectivity persists. In the case of one of the PCs, from the moment it was set up, it did not browse properly. In the case of the other, it has worked until recently - the past two weeks, and now behaves in the same manner as the other PC. In both cases, the DHCP appeared to be working correctly. Network Magic indicates that both computers are connected to my network and are functioning properly. I have also verified that my IP addresses for all the systems in my network are configured correctly. What do I need to do to get my connectivity to stay active once I reboot these PCs? I've looked in the archives, but none of the similar issues are similar enough to help me solve my problem. Anyone have suggestions that will lead me to a solution? Thank you, -- Michael D. Moore "Respect Is Earned, Not Granted"
• pinging a numeric address works but not an URL (alphameric)
  • After uninstalling ZoneAlarm (version 6.5), I could no longer access the web. Suspecting a problem with the TCP/IP connectoins, I have noticed the followings: - pinging an IP numeric address in the local network or in another network works fine (although I got 2 spurious characters between "Pinging" and the IP address when replying - Thus I got "Pinging yö 130.104.xxx.yyy" where yö are the spurious characters [not seen in another compouter]) - pinging an URL (alphameric address) does not work anymore (thus a "ping www.mysite.com" which would normally work gives "Ping request could not find host www.mysite.com... (the address is resolved from another computer)". I checked that the DNS server replies to ping and is, therefore accessible; other computers using the same DNS server work fine) - tracert (to a numeric or an alphameric address) does not work: only one hop and then "no resources" I ran "sfc /scannow" to replace any corrupted Widows file (it ran to completion; I was asked several times to insert the WinXP CD Rom and suppose, thereby, that some files were indeed replaced), but to no avail. Any suggestion (apart from reinstalling Windows entirely ...). Can this be corrected using the Microsoft repair console (and avoiding having to reinstall Windows entirely ...) ?
• I set up a network successfully then it disappears on XP. Magic?
  • Any answers? I have XP sp3 on all three computers. I have a 802.1 N router (linksys). I run ZoneAlarm Free Firewall. I ran the wireless network setup wizard. All computers can connect to the internet through the router. I ran the network setup wizard, shut down, restart and can see and share files and printers from and between all three computers. So my network is fully functional? No... Then I leave them for a short while and the shared folders disappear and I get this error message when I click on a listed shared folder from another computer: "\\PUPPY(one of the other computer's names)\My Documents is not accessible. You may not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network name cannot be found. Things I have tried: A. I checked that the network name is the same on all computers. (It must be coz it worked already but I still checked) B. I set the firewall to accept an IP range which covers all the computer's IPs in the trusted zone i.e. those IPs are accepted. C. I tried with no firewall on any computer at all. Still no joy. D. I tried to run network wizard again, restart on all computers and hey presto, the connections are all there again. Question: Where do the connections go? Why do they turn off? Are they timing out? Is it magic or voodoo? How do I nail this problem? Thanks to anyone who replies in advance. You people rock. And smile at someone new today. It works.
• XP network, PC not showing...
  • Thank you for wanting to read into these groups and providing any useful answers! My problem is the following: I run Windows XP Media Center edition SP2 on my PC and Windows XP Home edition SP3 on my netbook. When I connect both with a (Crossover) lan cable, I set up a network between them. My (ADSL, USB-modem) internet connection gets shared right away, so on my netbook I can go online too. (don't have wireless router yet). Now, I have two minor problems happening... First: When my netbook automatically goes in standby and I put it back on, there seems to be a problem with the LAN (and thus, the internet-)connection... connection beint limited or non-existent. Rebooting sometimes does help, but mostly it doesn't... Secondly: I don't seem to get a real connection between the both computers. There must be a network between them, since I can use the internet connection from the PC on my netbook (or am I wron on that one?) but in the "workgroup" my netbook only 'sees' itself (and not the PC) and the PC doesn't even see itself. there are several folders shared on the pc, and in the firewall settings I set sharing as an exeption... So far I transferred files between both computers with flash-drives and hard drives (and small files even through my email-account, since the internet connection is the one that does work...). It would be nice tough to be able to work on files located on the other machine (since I do a fair amount of photo-editing on my PC, but the files should stay on my netbook. So far I just transferred them from netbook to pc; then edited and then transferred them back. (photo-editing on a small screen is just impossible ;-) ) thanks again for any usefol commentaries or advice. I hope I provided enough necessary information. (oh, and yes, I did try to find an answer to my problem in these groups and elsewhere online before making this post...)
• XP / Vista networking
  • I have recently installed a fresh version of XP Pro on my PC. Since then I have problems with my network with a Vista Home Premium laptop. Previously I have had no problem with networking both machines which are connected by ethernet cable I can access the vista files and transfer to and from the PC but if I try to access the PC from the laptop I get the error message; Windows cannot access \\PC1 â??Check the spelling of the name. Otherwise there might be a problem with your network. To try to identify and resolve network problems, click Diagnoseâ?? Clicking diagnose brings up the message: â??Windows did not find any problems with this computers network connection.â?? I can access the internet from the laptop using the PCâ??s connection, and the PC appears on the network map and in windows explorer on the laptop. I have tried removing the Firewall and antivirus on both machines, and various registry alterations as suggest for this error on numerous other forum without success. Fortunately I can manage with just the connection from the PC but it would be nice to have things working both ways. Does anyone have a solution that works?
• HP officejet 4215
  • Been using this printer for couple years now. Somehow we got an "Intuit Printer" on our computer and everything was going to it and our printer kept going offline, I went in control panel and deleted the intuit printer and put ours back online and it did not help, so I tried to delete ours and was going to try to reinstall it. It is still showing on the control panel (although it still says deleting). We've tried unplugging everything, even the computer. Nothing will print even a test from the notepad, but if I do a test print from the printer itself, it will. How can I fix this?
• Ethernet adapter interfering with Mouse
  • I have tried 2 different mice (a Logitech and a Microsoft) on my laptop running Windows XP Pro SP3, and both of them were jerky. I finally traced the problem to the built-in ethernet adapter. Once I go into the Device Manager and disable the Intel Pro/1000 PL network adapter, then the mouse will be smooth. It will still be smooth even if I subsequently re-enable the network adapter. But if I restart Windows with the network adapter enabled, then the mouse will be jerky again. Not sure what's going on here, maybe it's a resource issue. I noticed that the network adapter is on IRQ 16, and one of the USB Universal Host Controllers is also on IRQ 16. But Windows won't let me change any of the resource settings for the mouse or the network adapter. I also tried a different USB port and still had the same problem. Any idea on how to fix this? If not, then is there a way to disable and enable devices from the command line? I'll just have a script disable and re-enable the network adapter on startup.
• VPN connection dialog box
  • I have a VPN connection configured on several computers that are permanently LAN-connected for Internet access, but I only use the VPN ocassionally. With varying frequency on the different computers, the VPN connection dialog box pops-up while I do unrelated things. On ne computer, it happens in streaks as often as once a minute or so. It is getting really annoying. I have tried deleting the VPN connection and recreating it, checking each parameter to make sure that nothing apparently indicates it is supposed to be always connected or otherwise perfrom this way. Any help on getting the VPN connection dialog box to come up only when I intentiaonlly do so ? Thanks.
• Wireless Zero Configuration
  • Have looked at many solutions to article 871122 problems but cant seem to find one that corrects mine. Our ISP was BT, which turned off WZC. I want to change from BT and have deleted the programmes via Add and Delete Programmes in the Control Panel. Running XP by the way. When the laptop searches for networks it still only finds BT's. Canâ??t seem to turn WZC back on. Can anyone help?
• Home network
  • I have two computers, Desktop and Laptop. Both access internet via my Live Box. Both are set up for Home networking. Laptop running IE7 works fine accessing files on Desktop and printer sharing. Desktop running IE8 is unable to show Laptop in My Network Places and fails to show workgroup computers in ( View workgroup computers),therefore can't access files on Laptop. Have run Home networking wizard several times. Might it be a IE8 issue and if so how do I revert back to IE7. Thank you. Ron.
• Problem with web folders
  • Hi! We want to connect to a web folder using the Windows explorer. When typing for example: https://mydomain.com/documents in Windows Explorer, it will open this in Internet Explorer, and not stay in the Windows Explorer. If we add this address to the web folders in Windows, it works, but only when going through web folders. Is there any possibility to force Windows Explorer to recognize the address as a web folder without going through the web folder hirarchy ? (something like "webfolder:https://mydomain.com/documents") Since we are using this method in a program, the current behaviour is not possible to use. BTW: In Vista it works. David
• getting 1068 error for windows firewall,windows audio,several othe
  • I had a tcp/ip corruption issue that I resolved...am not sure what caused it other than a power outage...after rebooting from resetting my tcp/ip my network connections are not showing and my windows firewall is not available, I tried to enable the service but get the 1068 error. I also get this error when trying to enable windows audio, and my device manager list of devices is empty?? It seems all my plug and play services/items are not functioning properly or are missing in the settings?? Any help is greatly appreciated if I can avoid a windows reinstall. Thanks for your immediate replies!
• HTML content variation
  • A challenging problem. I've done a lot of troubleshooting. So please excuse the lengthy discription, but I'm trying to narrow your thinking up-front. My laptop and desktop are highly similar environments (details below), but on (at least) one particular page of a web site, they receive slightly different html pages from virtually identical http-gets. Both machines have two browsers and both browsers behave the same on the misbehaving PC and both perform properly on the good PC machine. They all work properly on other pages from this web site. When I manually ompare the HTML source code received by the good machine and the bad one, there is always a one line difference between the downloads. The line is missing from the bad download. The line is always: <h ref="/ads/">Adult Services </a> When I manually move the properly received file onto the bad machine, it renders properly. When I manually move the improperly received file on the bad machine to the good machine, it renders the same as the bad machine. When I examine the http-get host header, I see only one parameter in the good machine's "get" that is not present in the bad machine's "get". That parameter is "infopath.1". I do not understand this parameter, nor how this difference could account for the different received files. At one time, Internet Content Advisor was enabled on the bad machine. My troublesheting has disabled it. But maybe the registry is out of sync for this application? This has been the focus of my troubleshooting, but I do not see how it could be responsible for different http responses. The two environments Both machines are running XP-SP3, updated to current levels both running IE-8 and Firefox, updated properly both PCS are on the same LAN segment. They are side by side in my office The bad machine is running Norton Internet Security 2006 and MS Office Suite 2002. The good machine is running Earthlink Protection Center v7 and MS Office Suite 2003 This problem is not intermittent. Either the server is delivering two different downloads, or something on my bad machine is intercepting the html and removing a line of code! I'm out of troubleshooting ideas !!!
• Saving & Deleing wesite from browsing history
  • This is my first questions to this news group. Kindly bear if the question is too long. Iâ??ve Internet Explorer 8.0 in my computer. Recently when I tried to delete some of the web sites from the browsing history (what I mean by browsing history, is, the search pane found in the left top most corner of the window), the entire browsing history got deleted. What I did was Tools > Delete Browsing History > Delete. (At that time of deleting, the Preserve Favorites website data, Temporary Internet files, Cookies and History were checked in). Now I cannot able to store any websites in the browsing history. Each and every time I have to write the complete address of the websites. No drop down list appears in the browsing history. My computer is connected with about 20 other computers through LAN and also through a server in my office. Earlier what happened, when I access any other computer, the link of these computers are also coming in the drop down list (which I donâ??t actually want). Now I have the following questions 1) How can I store / save website address in the browsing history? 2) If required how can I delete some selective websites (but not all) from the browsing history. 3) How can I prevent the link of the other computers in the LAN from entering into the browsing history? Please Help.
• Somethign screwy with DNS entry
  • OK. We have a web server with an internal address 192.168.0.254, and an external address of 12.14.16.18. The way our network is set up, inside our network, on 192.168.0.x, we can only access that server from the internal address. Attempting to access it with the external address fails. This is fine. Here is the problem: We have a Windows 2003 Server which is our primary DNS server, at 192.168.0.246. It has DNS Host entries for intranet.ourdomain.com and security.ourdomain.com, which both point to 192.168.0.254. These entries also exist externally, though godaddy.com or some such, pointing to 12.14.16.18. We also have an internal entry for test1.ourdomain.com, which points to the same internal address, but has no outside entry. I have verified that my system has the primary DNS server, our internal ...246 server. I have verified that it is working by pinging test1.ourdomain.com. It returns the ...254 address no problem. However, if I ping intranet.ourdomain.com, it shows up as security.ourdomain.com, with the 12.14.16.18 address. If my internal DNS server is working, and is first in line, and has a valid internal address for these two domains, why is it giving me the external DNS entry? What is broken? Note that all of this is served up from DHCP by that same Windows 2003 server, and other machines will ping out ...254 in response to those domains. No, it is not my Host file. Phil
• Printer Sharing
  • Have PC running Vista XP Home and connected Printer on home network Have 2 x XP Pro PC on home network and I wish to use printer on Vista machine. Under 'My Network Places' all PC's are detected but when I try to connect to Vista PC (for printer) , it requires a user name and password. !?! The vista machine was set up with 2 accounts but no passwords. I've tried inputting user name of logged on account but no password * as none exists). Fails because blank passwords not allowed!!!! What's going on ????? and how do I connect to printer ?????
• Isolating computers on a LAN from each other - A special kind of switch
  • Hello All, I have an ADSL modem with just a single connection coming outof it, which goes into a simple simple hub to which I've connected several computers. Currently I want to install another computer on which I should be able to do *anything* with it in regard to downloading stuff from the web, which means its pretty open to catching some sort of disease .... For this reason I need it to be seperated from my other computers (only be able talk to the internet, not to any of the other computers I have). I thought of a special kind of switch, one with a single output (to the model) and two or more inputs (from the computers). The data coming from the inputs will only be routed to the output, *not* to any of the other inputs. Ofcourse, any data coming in from the modem for one of the computers will be routed to it (and only it). My question : does some sort of device like it exist (for the consumer-market) ? I've taken a look at NetGear and LinkSys, but can't seem to create a search-query to return anything worthwhile. If anyone knows another solution (*not* involving setting up a seperate computer) I would allso like to hear about it. Regards, Rudy Wieser
• View desktop remotely on web browser
  • I have a computer that's running surveillance software. The computer is connected to broadband internet via a d-link router and the router gets dynamic IP from my ISP. I would like to set up the computer so I can view the computer's desktop over the internet on a web browser. that is view the surveillance pictures - since the surveillance software and cameras load automatically when ever the computer boots up. The computer is running a security software called Diginet surveillance software. The connection needs to be done in a way that viewing desktop/surveillance pictures on the web will not disrupt the computer's operations at location . I have tried remote desktop. it's a mess. Does anyone know how to do this using native XP/SP2/SP3 professional objects or free third party software? I would appreciate any pointers. Thanks in advance.
• wireless connection problens
  • hi Everybody. I have a wireless broadband that is established in my first floor. i need to connect my one Computer(Windows XP sp2) that is in my ground floor that has wireless pci card(D-Link DWA 510) with internet. and i have one laptop(Windows Vista Ultimate) that i wanna to connect to internet also. and i have one more Computer(Windows xp sp2, First Floor) thati wanna to connect to internet through Ethernet. So what should i do. Please Help. Thanks in Advance. When my One Computer Connect to internet other pc and laptop cannot with internet. if i wanna to connect my another pc or laptop i have to disconnect my first computer from internet.ona pc at a time i can connect to the internet. i already have a router. Have a Nice Day. adroie
• Connection dropped routinely
  • I am running a Dell Inspiron 8200 With Win. XP SP3. I upgraded to a Netgear DGN 2000 Router / Modem and also installed an Intel PRO/Wireless 2200 BG Network Controller. My ethernet connection is a 3Com 3C920 Integrated Fast Ethernet Controller. It doesn't matter whether I connect by cable or wireless, after I am connected, the connection is dropped every 20 sec. for a period of a sec. or two. I get the bubble "limited or no connectivity" followed by "acquiring network address". It then connects again for another 20 sec. I have upgraded the firmware on the router but can't update drivers for the Intel card because connection is constantly dropped. I have turned off firewall settings for Norton Internet Security but it doesn't matter. I suspect setting issues.
• Can't access desktop--ZA Problem
  • Howdy. For years I've had my desktop and then a wireless laptop which was able to access some files on my desktop. All of a sudden, it can't find the network path. When I disable Zone Alarm from the laptop, it works fine. I probably did do a ZA upgrade recently but I'm not sure. I still seem to have addresses listed in the Trusted Zone, but I'm not sure if they are correct. It's been many years since I set it up. Any suggestions/guidance would be appreciated. Mel
• User switch drops wireless network connection
  • XP Pro SP3 on a Dell Inspiron 1520 laptop with fast user switching enabled and connected to an 802.11g wireless home network. Every time I switch users the wireless network connection is lost and takes a minute or more to reconnect. This is very annoying. How can I prevent this? Thanks. -- .Bill.
• Please help me get Remote Desktop to work.
  • I'm trying to connect through the web browser IE8 to XP Prof host PC. With the ActiveX plugin running I select the desired resolution and click on the connect button. A window then pops up that asks some questions related to printer/file sharing and when I click its connect button a border of a window appears momentarily in the browser and then the ActiveX remote login web page comes back. No error message of any kind is given. I have followed all the steps to the letter on enabling RD support on host PC. For example, I read and followed this page: http://www.microsoft.com/windowsxp/using/networking/expert/northrup_03may16.mspx On the server side I have disabled windows firewall and My McAfee personal firewall has all IP and ports enabled for IIS and I also added a rule that permits RDP. I also tried disabling that firewall too. I have IIS and WWW serivces installed and port changed from 80 to 50000. I have a linksys 54GL router which forwards ports 443. 3389 and 50000 to my host pc, whose local IP is 192.168.1.100 I just don't get it. All the research I've done says it should work but it instantly closes (doesn't even ask me for username/password) and returns to the IE screen that asks for server and screen size. Without any error messages. Has anyone run into this?
• Network Printer Problems
  • Windows XP PCs/laptops all running on a shared home network. Set up printer connected to one of the PCs for sharing. When attempting to connect one of the PCs(laptops) to a printer, which I can see using browsing, I get an error message (Error: The printer name is not valid). Tried renaming. Current name "HP2200". Highlight the "browsed" printer and click Next, I get the error; "Windows cannot connect to the printer. Either the printer name was typed incorrectly or the specified printer has lost its connection to the server. For more information, click help".
• File sharing working one way
  • Can't find the solution in other posts so far. A curious problem. Couldn't ping either way in a 2-computer network. Disabled the firewall and turned the router firewall on and now can ping both ways. On computer #1, I can see the shared folders and files on computer #2 and print to its shared printer. On computer #2, I can see the shared folders on computer #1, but cannot access the files, but can print to its shared printer. Also have a shared USB drive that is visible, but not accessible. I've tried unsharing and resharing the folders to no avail. What am I missing? This was working several weeks ago but has all of a sudden stopped.
• Shared folder over network suddenly asks for password
  • I have 3 computers on my home network, Dad, Son and Laptop. Dad has XP Media center addition, the other two XP Home (all with SP3). I backup Laptop work files to Shared folder on Dad. Suddenly I cannot access shared folder on Dad, which now asks for a password. I do not have users password protected. I have tried every conceivable password I have ever used, with no success. Dad can ping Son and Laptop without any problems and son and laptop can ping Dad. Neither Son nor Laptop can access shared folder on Dad. I have disabled all firewalls. I have simple file sharing enabled on Dad (media center apparently is like XP Pro in allowing this option). I have run and rerun Network Wizard and even renamed all the computers to see what happens. The shared folder on Dad continues to ask for a password whenever I try to access shared folder on Dad from either Son or Laptop. This occured I believe after I deleted another user account on Dad that *was* password protected, but I did not need anymore. The shared folder on Dad obviously has nothing to do with that account. Guest accounts are active on all computers as I've read Microsoft Tec Bulletins that say disabling Guest can cause problems accessing some network resources. This is *not* a problem with a lost password. Dad was never password protected in the first place, other than the single user account now deleted. All computers show up when I check for networked computers on Son, Laptop and Dad. I have even placed Dad outside the router firewall, with no success. I have seen others with this sudden problem but no solution. Any help would be appreciated. ..........Bob
• Cannot load device driver for network adapter code 39
  • After cleaning a virus/trojan from my WinXP system I cannot get my network adapters to load. In Device Manager they both have yellow exclamation marks and the error "Cannot load device driver for network adapter (code 39)". There are 4 other devices called "Wan Miniports" that also have the same error. I've reinstalled windows XP, and reinstalled the device drivers without luck. I also tried various TCP/IP and Winsock fixes without effect. I installed a fresh copy of WinXP in another folder and everything works perfectly so I know my hardware and internet connection are fine. This happened to me last year and I had to reinstall my system, but it took me weeks to reinstall my apps and get every working correctly. Any help with this would be greatly appreciated! - Scott.
• XP internet connection sharing troubleshooting
  • Hello All, I dont have much experience in networking hope some one can help me with this. I am in a school network with ip address 166.X.X.X. My XP PC is connected to the network i have an ip of 166.X.X.X. ( i will name my PC as 'PC A'). For a specific project we purchased a win NT 4.0 workstation PC ( i will call this PC 'PC B') and wanted to connect to our network 166.X.X.X so we decided to do a ICS ( internet connection sharing) with my PC A which is in XP everything went well and the PC B was assigned a ip of 192.168.X.X we are able to surf network with both PC A & PC B . but when we want to share files to PC B from my friends PC whos is in the network with ip 166.X.X.X the PC B does not shows! also when we ping the ip of PC B '192.X.X.X' from our ip 166.X.X.X there is no responce but i am able to share files from PC A and also able to ping from PC A. Is this a limitation in ICS that the client PC will not be shown outside the internal network? any solution to solve this is much appreciated I was suggested that i need to use a dual LAN server if i need to see the clients outside the internal networks... The reason for me to ping is i need to send some packets to this PC B and wants its response to this. Thanks, sorry for long description! Rufus
• Internet Provider (ISP) For Gateway
  • I need something that will grab an IP address, and do a URL update! Has anyone seen a script that will query and copy? Something like this: http://24.57.192.59/lib will change to: http://24.57.###.###/lib
• Networkdrive doesn't work on Nlite XP Asus eee 901
  • Hi, My Network Space Drive from LaCie doesnt work on my Asus 901 eeepc. I have installed a Nlite version of XP on this laptop, for it is much smaller and faster but doesnt have all the features. There's a big chance I dont have some network proces running or something not installed that is needed for the LaCie drive to work. When installing the LaCie Network Assistant, it sais: script: C:/progfiles/lacie/ethernetagent/bonjour.vbs system cant find the file 80070002 Source (null) Ofcourse I hope I can keep my Nlite-XP so is there anyone who can point me in the direction of which file or process to add to make the drive work? I've looked into this Bonjour process and it seems to be running on my laptop. Thanks! Wouter
• File Sharing in a Peer to Peer Network
  • Hello Everyone: I am trying to implement file sharing in a Windows/XP Peer to Peer Network. I have 10 Windows/XP computers networked together -some of them are allocated to Staff, others are Guest machines. I need the Staff machines to be able to share files and I need those shared files to be inaccessible (and preferably not visible) to the Guest machines. My starting point was to disable Simple File Sharing so that I could use the user level permissions. (Simple File Sharing does work in this configuration, but I would like more access control at a user or machine or workgroup level.) When I try to set permissions, the Shared Document Properties shows me local objects only, not other machines/users on the network i.e. in Permissions/Add/Select Users or Groups, I am not able to select anything other than the local machine. Can someone oint me in the right direction? Thanks. . . Tony N.
• Dial-up Modem
  • Dear All, I am glad to be back here. I have a problem with my windows XP computer; I have a wireless modem to connect to my ISP the drivers installed successfully. However I have to use also my internal modem by going through the new connection wizard and by selecting to set it up manually. the problem is that when I arrive at that step it gives me only "connect using a broadband connection that is always on"; the choices to choose "Connect using a dial up modem" and "Connect using a broadband connection that requires a user name and password" are not given, they seem not highlited and not given as an option. But i want to use the first option in order to be connected. Could you help me please? Thank you in advance!
• Generic Host Process For Win32 Services Error in XP SP3
  • My computer is XP Home Edition(Chinese-Trad). When I connect to the internet,"Generic Host Process For Win32 Services Error" pop up and I can only use the Internet(Not only IE) for 5min.After the five minutes, the Internet stop. I find a Security Update for Windows XP (KB921883) which may can solve my problem. However, it is not for XP SP3. When my computer is buy, it is Window XP Home Edition SP3. This is the code find in Management Console. 0000: 41 70 70 6c 69 63 61 74 Applicat 0008: 69 6f 6e 20 46 61 69 6c ion Fail 0010: 75 72 65 20 20 73 76 63 ure svc 0018: 68 6f 73 74 2e 65 78 65 host.exe 0020: 20 35 2e 31 2e 32 36 30 5.1.260 0028: 30 2e 35 35 31 32 20 69 0.5512 i 0030: 6e 20 6e 74 64 6c 6c 2e n ntdll. 0038: 64 6c 6c 20 35 2e 31 2e dll 5.1. 0040: 32 36 30 30 2e 35 37 35 2600.575 0048: 35 20 61 74 20 6f 66 66 5 at off 0050: 73 65 74 20 30 30 30 31 set 0001 0058: 30 31 62 33 01b3
• VPN that passes firewall?
  • I have several computers in a peer-to-peer LAN at one office. Several machines have shared folders. Now a new office is opened that I travel to a few times a month and I need to access the LAN from the new office. The total size of the files in the shared folders is a few megabytes (excel and word files). I'm running windows XP and vista. There is no dedicated servers or domain controllers and I'd like to keep it that way because there is no one to maintain the server. In both locations (a rented office in a building), there is internet access but I do not have direct control of the router/firewall. So I can't open or forward a port. I briefly look at the VPN in XP pro. It looks like I need a fixed internet IP (which I'm not sure I would get; since the internet service is DSL, probably with DHCP). It also requires mod to firewall, which I have no control over. Is there an alternate solution? No need to walk me through a setup. Just point me to the right technology/software. It doesn't have to be VPN, that's just the first thing that comes into mind. The files are business-critical files, so hosting them on an outside server won't work because if the internet goes down, I still need to conduct my business at the main office.
• VPN connection "volunteers"
  • This is merely an annoyance, but the dialog box for connecting a VPN connection occasionally pops up all by itself. I recently did a format/rebuild on this Windows XP Pro (SP3) computer and do not recall this happening prior to that. I figure it is some obscure option I need to set/reset. Thanks in advance for the help. Cheers. dj
• D-Link DI-604 Router Question
  • Does the DI-604's DHCP server serve DNS as well as IP addresses ????? Under WinXP and Vista, for the last 3 years, I have had my 4 PC's set to obtain IP address and DNS address automatically under the TCP/IP settings and it's always worked until last week. Suddenly I had random lack of Internet access when I powered on my PC's. The only way to get it back was to power cycle the router before turning on my PC's. The Internet would work fine after this until I powered down a PC or rebooted a PC then that PC would loose Internet access. Since all this started I found that if I leave the obtain IP address set to automatic but put the routers address in the DNS address box everything works and my Internet connection always works. The DI-604's manual shows both set to obtain automatically in the illustrations but says nothing about it in the text. I've also reset the router to factory defaults several times but it makes no difference. I don't know if this router is starting to die or what........ Does the 604's DHCP server assign DNS as well as IP numbers ???? Thanks Brian
• 2 networks for diferent uses (wired and wirless)
  • Hi, My laptop is connected to 2 networks; wired: ofice network and wireless: ADSL modem. I want to be able to use them simultaneously without requiring to remove ethernet cable every time I want to use Internet. I have lowered the metric of wireless connection but still have default gateway of wired connection. I have also Microsoft Firewall Client for ISA Server Version 4.0 installed ans set to an ISA server on ofice network. Route print result: =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 13 e8 11 e9 95 ...... Intel(R) Wireless WiFi Link 4965AGN - Teefer2 Mi niport 0x3 ...00 09 df 80 65 5d ...... Intel(R) 82566MC Gigabit Network Connection - Te efer2 Miniport =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.3.0.1 10.3.19.34 20 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.2 2 10.3.0.0 255.255.0.0 10.3.19.34 10.3.19.34 20 10.3.19.34 255.255.255.255 127.0.0.1 127.0.0.1 20 10.255.255.255 255.255.255.255 10.3.19.34 10.3.19.34 20 76.255.7.0 255.255.255.0 192.168.1.1 192.168.1.2 2 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.1.0 255.255.255.0 192.168.1.2 192.168.1.2 2 192.168.1.2 255.255.255.255 127.0.0.1 127.0.0.1 2 192.168.1.255 255.255.255.255 192.168.1.2 192.168.1.2 2 224.0.0.0 240.0.0.0 10.3.19.34 10.3.19.34 20 224.0.0.0 240.0.0.0 192.168.1.2 192.168.1.2 2 255.255.255.255 255.255.255.255 10.3.19.34 10.3.19.34 1 255.255.255.255 255.255.255.255 192.168.1.2 192.168.1.2 1 Default Gateway: 10.3.0.1 =========================================================================== Persistent Routes: None tracert www.google.com result: Tracing route to www.l.google.com [74.125.39.106] over a maximum of 30 hops: 1 2 ms 1 ms 1 ms 10.3.0.1 2 * * * Request timed out. 3 ^C Then I tried to add manual route to 74.125.* (google) route -p add 74.125.* mask 255.255.255.0 192.168.1.1 METRIC 5 However; new route print results in with different destination address for persistent route: =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 13 e8 11 e9 95 ...... Intel(R) Wireless WiFi Link 4965AGN - Teefer2 Mi niport 0x3 ...00 09 df 80 65 5d ...... Intel(R) 82566MC Gigabit Network Connection - Te efer2 Miniport =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.3.0.1 10.3.19.34 500 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.2 2 10.3.0.0 255.255.0.0 10.3.19.34 10.3.19.34 500 10.3.19.34 255.255.255.255 127.0.0.1 127.0.0.1 500 10.255.255.255 255.255.255.255 10.3.19.34 10.3.19.34 500 76.255.7.0 255.255.255.0 192.168.1.1 192.168.1.2 5 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.1.0 255.255.255.0 192.168.1.2 192.168.1.2 2 192.168.1.2 255.255.255.255 127.0.0.1 127.0.0.1 2 192.168.1.255 255.255.255.255 192.168.1.2 192.168.1.2 2 224.0.0.0 240.0.0.0 10.3.19.34 10.3.19.34 500 224.0.0.0 240.0.0.0 192.168.1.2 192.168.1.2 2 255.255.255.255 255.255.255.255 10.3.19.34 10.3.19.34 1 255.255.255.255 255.255.255.255 192.168.1.2 192.168.1.2 1 Default Gateway: 10.3.0.1 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 76.255.7.0 255.255.255.0 192.168.1.1 5 What should I have to do? Thanks and Best regards...
• Network Connections Display
  • I have a wireless home network with 2 computers and 2 wireless printers. All components are working fine. The main computer is cabled directly to the Linksys router. When I click on network connections I get the connections screen but nothing is displayed. The other computer displays the network connections correctly. I can access the router through the main computer with no problems. When I tried the network setup wizard I got a message saying could not locate the network hardware. I have no problem connecting to the internet from either computer. The problem occurred sometime after I replaced internet explorer 7 with 8. I am not sure what caused the problem because I didn't try to display the connections until sometime after the upgrade. -- Lloyd J Maddox
• What ports are Microsoft updates using?
  • Hi All, I am doing some firewall programming. What port(s) are Microsoft's updates coming through? 80 TCP? Many thanks, -T
• Been Trying to Print on Network for 3 DAYS
  • Hey There, A friend of mine and I are setting up a network for a friend of ours who runs a small business. We cannot seem to get the printer working over the network in ANY situation. We are running windows server 2003, with the enabled roles of active directory, file sharing, DNS Server, and DHCP. Before we had done anything at all, we attached the printer to the server and shared it with the Printer Management role, and that worked. It worked very well. We were able to add each printer on each computer with \\servername\printername and it worked for printing documents from any computer. Then, after a day or so launched all the services, launched all the accounts, tweaked everything, and then attempted to print. Did not work. Here's what we've done since then. Tried deploying the printer and giving every user admin rights over it. Tried connecting the printer to a workstation and sharing it from there. Tried connecting the printer to an airport extreme to have it accessed through its static IP address. Tried adding the printer to a wireless print server to give it its own unique IP address. Tried adding it to the Belkin USB hub so that it had both an IP address AND a Mac address to add to our DHCP reservation lists, on a variety of routers. In any scenario, we get an array error messages. Printing a test page we get "Your Test Page Failed to Print. Would you like to view the printer troubleshooter for assistance?" We did, with no results. Printing a page with notepad we get "Invalid Handle" Printing with command prompt, we get NO error messages, but nothing prints. Please tell me that someone has a solution that I have not tried, I desperately need to get this printer working, because I DO NOT charge by the hour hahahaha.
• Redo Win XP Pro SP3 workgroup "share" access
  • I have a simple home network with usually 2 PCs (both with Windows XP Pro SP3 / IE8.) They are part of a standard workgroup (MSHOME.) This past week-end I finally was able to replace the defunct second PC (motherboard died) and I am re-connecting this new PC to the network. The problem is that this PC (PC-2) can not access my "main" PC (PC-1) "shared" folders but PC-1 can access PC-2 "shared" folders. What are the steps I need to do in order to check the correct settings and fix it so that either can access to work from either?
• file sharing with vista home basic
  • I've a home network consist of Vista Home Basic & XP. While both computers were set to share files & printers, I can see & access files in the XP PC from the Vista PC but cannot see any Vista PC from the XP PC. Pls help. Tks, Stephen
• Very bizarre internet access question
  • Router wired to 6 port hub. Toshiba laptop wired to hub running XP Pro SP2. Desktop wired into hub running XP Pro SP3. The Toshiba has internet access, the desktop does not! How bizarre is that and how do I go about diagnosing WHY the desktop does not have internet access? (The desktop can ping the router OK).
• Wired and Wireless Networks
  • I have a wired network connected to my company intranet, and a wireless connecting to the internet. Right now, my wireless is set to be the default gateway for accesss to the internet. However, I would like my Outlook 2003 to connect to the my company Exchange server through the wired LAN, rather than through wireless using http, because the wireless is unstable. Some people said it is resolved by adding a persistent route. However, I am not very familiar with routing, and using a DHCP server in my wired LAN. Would anybody please suggest how to add the persistent route? route -p add ................... Below is the routing table of my PC. c:\Documents and Settings\Administrator>route print =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x20005 ...00 ff b0 8a 2e 87 ...... Juniper Network Connect Virtual Adapter 0x30002 ...00 1f 29 b0 17 ec ...... Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller - Packet Scheduler Miniport 0x60004 ...00 16 ea db 2d 3a ...... Intel(R) Wireless WiFi Link 5100 - Packet Sc heduler Miniport =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.6.34.253 10.6.34.7 12 0.0.0.0 0.0.0.0 10.6.34.254 10.6.34.7 11 0.0.0.0 0.0.0.0 192.168.8.1 192.168.8.4 1 10.6.34.0 255.255.255.0 10.6.34.7 10.6.34.7 11 10.6.34.7 255.255.255.255 127.0.0.1 127.0.0.1 11 10.255.255.255 255.255.255.255 10.6.34.7 10.6.34.7 11 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.8.0 255.255.255.0 192.168.8.4 192.168.8.4 1 192.168.8.4 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.8.255 255.255.255.255 192.168.8.4 192.168.8.4 1 224.0.0.0 240.0.0.0 10.6.34.7 10.6.34.7 11 224.0.0.0 240.0.0.0 192.168.8.4 192.168.8.4 1 255.255.255.255 255.255.255.255 10.6.34.7 20005 1 255.255.255.255 255.255.255.255 10.6.34.7 10.6.34.7 1 255.255.255.255 255.255.255.255 192.168.8.4 192.168.8.4 1 Default Gateway: 192.168.8.1 =========================================================================== Persistent Routes: None c:\Documents and Settings\Administrator> How can I do that? THanks in advance!
• Diagnostic Policy Service - Access Denied
  • I am running Vista on a Dell and have connectivity to my wireless network, however, I am unable to connect to the network. When I try to run the diagnostic serivce it suggests, I get the following message: Windows could not start the Diagnostic Policy Service service on Local Computer. Error 5: Access is denied. I am logged in as admin. Any thoughts!!??