- The Registry Cannot load the hive (file)
-
I have a friend and apparently the Lord doesn't like him very much.
He gets a blue screen of death with the following message.
The Registry Cannot load the hive (file)
\systemroot\system32\config\software
or its lot or alternate.
it is corrupt, absent ot not verifiable.
I googled this message and the only way I see to fix it requires the
Windows media. He is currently traveling the world and doesn't have his
CD with him.
Is there a way for him to recover the registry some other way?
This is why I use a Mac....
--
http://www.vatican.va
Sat Feb 20 21:45:09 CST 2010 |
6 |
Sat Feb 20 21:45:09 CST 2010
by Father |
- Audio Problems - Help!
-
Hello..
Ever since I put a fresh install of Windows XP Professional on my computer,
32 bit btw, I have not been able to get sound to come out of my speakers..
Yes, I did install the drivers from my manufacturer's website, and even
installed a program called Driver checker to install all the missing drivers
I needed.. But still, no sound. Headphones don't even work so I know it's not
the speakers fault, it's obviously some kind of driver messing it up or
something.. Anyone have any ideas? I can supply screenshots of anything, if
needed.
Sat Feb 20 17:21:01 CST 2010 |
13 |
Sat Feb 20 17:21:01 CST 2010
by Rylie |
- DIRECTDBNOTIFYWNDPROC
-
I am running XP. Frequently, my outlet express fails to work. The only way
I can get it started is to reboot my computer. When I reboot, I get the
message "DIRECTDBNOTIFYWNDPROC is not responding" (or something to that
effect). After I click on "Shut Down Now", the computer reboots and Outlook
Express works again.
Is there a remedy for this?
Thanks
Wes
Sat Feb 20 14:55:05 CST 2010 |
4 |
Sat Feb 20 14:55:05 CST 2010
by Drew |
- Temporary Keyboard lockup
-
Hello,
As I'm typing I notice notice my keyboard will lock up. For example I may
type the word "computer" & look at the screen & only see the little "c". The
cursor will be locked up. After about 10 seconds the rest of the letters
appear. I cleaned my keyboard but the problem still occurs. However, as I
typed this message the problem didn't occur. It comes and goes. I can
speed up the 10 second delay by clicking on another web page & then coming
back to my message & the cursor will be blinking fine.
john
Sat Feb 20 12:56:01 CST 2010 |
6 |
Sat Feb 20 12:56:01 CST 2010
by socks |
- startup tray
-
I want to remove some stuff in my startup tray area like printer, norton
security and the like. I tried msconfig and has a lot of things there that i
wasn't sure of so I left it alone. Is there a program that is safe to use
where you can get the junk out without causing problems with the system?
Sat Feb 20 11:05:01 CST 2010 |
3 |
Sat Feb 20 11:05:01 CST 2010
by Foubar |
- Cannot load SP3 on my SP2 XP
-
Cannot load SP3 on my SP2 XP:
I tried this run SP3 last night on my computer and it told me "not
allowed" (going from memory). After this, my system has to remove all
the files and then it says "couldn't uninstall correctly, XP might not
work properly".
The system is running fine, but I wonder why but I wonder why I cannot
install it?!?!
Before this, I had a problem with IE not working and I thought it
might be fixed with SP3 (it wasn't the issue it seems) - but since
have fixed the IE issue, but now it leaves me wondering about SP3 and
why it isn't working.
Sat Feb 20 10:20:53 CST 2010 |
4 |
Sat Feb 20 10:20:53 CST 2010
by daviddschool |
- Window control elements (minimize, maximize, close, scroll bars, etc)
-
The issue I'm seeing is actually on an NT4 server with IE6-sp1, but I'm
asking here because there aren't enough people following NT4 newsgroups
any more, and I figure that NT is similar enough to XP in this
situation.
The problem is that these graphic symbols or control elements are
screwed up:
- window minimize, maximize, and close buttons (upper right-hand
corner of any window)
- scroll bar up and down arrows, arrows for drop-down lists (the
actual small black arrow)
- radio buttons and check boxes
are screwed up and seem to have been replaced with numbers or letters
(in the case of the first two items) and radio buttons and check boxes
are so mangled that it's hard to tell when a check-box or radio button
has been set or is empty.
The system in question has been like this for probably the last 7 years,
and I have no ides what might have triggered or caused it.
What part of an NT / XP system is responsible for rendering those window
and menu-interface objects?
I've re-applied the last service-pack for NT4 (SP6a) and re-installed
IE6-sp1. I've changed the video card in the system (from ATI to Nvidia)
and installed the correct video drivers.
What API, GDI, kernel, DLL, VXD, activex, directx, or font files (etc)
plays a role in rendering these particular window control elements or
objects?
Sat Feb 20 09:58:44 CST 2010 |
2 |
Sat Feb 20 09:58:44 CST 2010
by XP |
- IE and Maxthon not working, but Firefox is?
-
FIREFOX work - I can surf etc, BUT I cannot load IE or Maxthon at
all. It brings up a page that says :
Internet Explorer cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
What you can try:
Check your Internet connection. Try visiting another website to
make sure you are connected.
Retype the address.
Go back to the previous page.
This is weird because I haven't changed anything in my system - any
ideas?
Sat Feb 20 09:11:43 CST 2010 |
7 |
Sat Feb 20 09:11:43 CST 2010
by daviddschool |
- OT? Software installation
-
I hope this is not too OT. I'm trying to install some software (Abbyy
Finereader into Epson Smart Panel) and need to go to the program folder
where the relevant .exe file is. When I do, I see no way of actually
opening the folder. I'm presented with a dialog box enabling me to
scroll down and find the folder, but clicking it or doing anything else
won't actually open it.
What am I doing wrong?
Rob Graham
Sat Feb 20 07:58:06 CST 2010 |
16 |
Sat Feb 20 07:58:06 CST 2010
by Rob |
- Windows movie maker
-
Hi
I have just linked up my sony handycam to my computer which is running vista
32 bit. I managed to download video on to windows movie maker. I also have
Roxio 2009 installed and when I switched to this to download the remainder
of the video it did not recognise the video camera as being connected.
When I switched back to Movie Maker, it does not recognise the camera being
connected either. Compatibility issues?
Thanks
Sat Feb 20 06:26:02 CST 2010 |
1 |
Sat Feb 20 06:26:02 CST 2010
by Canny |
- Print menu not displaying properly?
-
Print menu not displaying properly? Half of the options are inaccessible
because the dialog boxes are too large. There are two out of the five
printers that are doing this.
Check out the screenshot.
http://www.netresults.sk.ca/images/rescue.jpg
Fri Feb 19 21:49:01 CST 2010 |
3 |
Fri Feb 19 21:49:01 CST 2010
by Keith |
- rootkits on new pc?
-
I just ordered a new pc from a small system builder. It will have Windows 7
Ultimate.
I'm not accusing anyone of anything, but how can I tell whether it comes
with a rootkit installed?
Fri Feb 19 20:44:56 CST 2010 |
9 |
Fri Feb 19 20:44:56 CST 2010
by Sam |
- XP Won't boot
-
This obviously is not an XP problem, but hope someone here can point me in
the
right direction... Windows XP Home, MSI Motherboard, SiS chip set I
believe.
I picked this machine up today. It was booted and running at its previous
location.
I disconnected everything brought it home, plugged it in, never get anything
on
the monitor. After about 3 seconds, get about a 10 second beep, then about
a six
second pause, and keeps repeating this 10 second beep with that 6 second
pause.
I let it continue thru 7 or 8 beeps.
I've reseated the memory, tried different keyboard, mouse, power cord, HD.
About the only thing different from its original connections, I've connected
it
directly to an AC outlet, where it was connected thru an APC UPS device, and
it was connected to the internet thru a router. The only connections I have
now
are Power, Mouse, Keyboard, Monitor.
Earl
Fri Feb 19 17:44:13 CST 2010 |
8 |
Fri Feb 19 17:44:13 CST 2010
by Earl |
- The "Sysinternals" help screen.
-
I am in the "Process Explorer" part and I want to know what
the color scheme means.
When I access the help menu I get: "Navigation to the
webpage was cancelled. What you can try: retype the
address". What does this mean, and how can I fix it?
Please help, Frank
Fri Feb 19 17:15:03 CST 2010 |
7 |
Fri Feb 19 17:15:03 CST 2010
by Frank |
- Drivers
-
Afer installing software, I know that it is a good idea to check the
msnufacturer's website for 'newer' drivers.
When clicking on a 'driver,' how will I know if I have the 'latest' one?
Will it install regularly if it I don't have the latest one and ask me if I
want to 'override' if I do have the latest one?
Not all manufacturer website have a link to 'automatically check for latest
drivers.'
Fri Feb 19 16:31:01 CST 2010 |
5 |
Fri Feb 19 16:31:01 CST 2010
by Summer1 |
- HELP! Login/logoff loop problem!
-
I have a big problem - two of my home machines seem to have been hit with
some kind of virus. When I type my password to login it immediately logs me
off. All I can see is my desktop background flash on screen before it logs me
right off.
I found some articles on fixing this like these:
http://www.winxptutor.com/wsaremove.htm
http://techrepublic.com.com/5208-11184-0.html?forumID=47&threadID=160649&messageID=2208716&tag=content;leftCol
however I got a big problem - I dont seem to have a copy of userinit.exe to
copy! it simply does not exist on that machine or the recovery console can't
see it!
To make this even worse I wanted to try using my KNOPPIX Linux boot cd to
try and see if I can get a userinit.exe file in there from another PC but
that PC wont boot the linux either!
What frustration... can anyone provide any ideas on how I an resolve this? I
dont have any floppy drives so that's out. I have USB flash drives but
without being able to boot windows or linux I can access them
Fri Feb 19 16:11:01 CST 2010 |
3 |
Fri Feb 19 16:11:01 CST 2010
by trant |
- Removal of workgroup/workstation, etc.
-
I recently purchased a computer from a company going out of business. The
computer works great, except I want to "remove" the idea of it being a
workgroup/workstation computer. I do not want to have to log in each time.
Not to mention there is a group policy in place that effects auto-updates,
etc. I have Windows XP Professional. I currently have to log in as an
administrator, but my rights and privledges are still somewhat restricted by
the "Group Policy". How do I remove the "workgroup/workstation" and make my
computer a regular home computer? Can I just remove the administator or
would that keep me completely from using my computer? Please help.
Fri Feb 19 15:14:02 CST 2010 |
5 |
Fri Feb 19 15:14:02 CST 2010
by Crosby_w0612 |
- Context menu opens on wrong monitor in dual-monitor setup
-
Hi,
Using two monitors -- main on right; secondary on left. When I click a
context menu in Dreamweaver on a panel that is on the secondary monitor, the
menu opens all the way on the right side of the right hand monitor. I have
tried everything I can think of, and the problem persists.
Anyone have any ideas?
Thank you.
John
Fri Feb 19 11:29:01 CST 2010 |
6 |
Fri Feb 19 11:29:01 CST 2010
by JohnBlaustein |
- Separate paragraphs combine into one hugh paragraph on forum.
-
I have Windows XP-Pro SP3 but I have also posted this on both the
Firefox and NoScript support forums because I do not know if my
problem relates to Windows XP-Pro SP3, Firefox 3.6, NoScript 1.9.9.47,
or none of the above. The problem does not occur with Windows 7,
Firefox 3.6, NoScript 1.9.9.47
The problem is in posting messages on a particular forum:
windows7forums.com. Separate paragraphs combine into one hugh
paragraph when I post a message with my desktop XP computer. When the
paragraphs combine into a superparagraph, the linefeed (enter key)
does not function to divide it. It happens to the posted message, but
I do not have to post the message to make it happen. When I [preview]
the message the superparagraph is displayed. Also the input-text in
the editbox gets replaced by the equivalent of the previewed
superparagraph.
To learn more, I performed an experiment where I posted a message
containing paragraphs with my Windows 7 laptop. The
paragraphs/linefeeds displayed normally when posted from the W7
laptop. It looked like this:
==== BEGINNING
This test is with my other computer -- the Windows 7 one.
NEW PARAGRAPH: This starts a new paragraph with a blank linefeed above
it.
NEW PARAGRAPH: This starts a new paragraph with no blank line added
above it.
Stan Hilliard
==== END
This message above looks the same when viewed on the forum with either
PC. When I post that same message from the XP desktop PC I get a
message that looks like this on the forum.
==== BEGINNING
This test is with my other computer -- the Windows 7 one. NEW
PARAGRAPH: This starts a new paragraph with a blank linefeed above it.
NEW PARAGRAPH: This starts a new paragraph with no blank line added
above it. Stan Hilliard
==== END
This message above also looks the same when viewed on the forum with
either PC.
Then with my XP desktop PC I used the forum's [edit] button to edit
the good looking message that I had posted from the W7 laptop. Here is
what I saw in the message-edit textbox:
==== BEGINNING
This test is with my other computer -- the Windows 7 one.<br />
<br />
NEW PARAGRAPH: This starts a new paragraph with a blank linefeed above
it.<br />
NEW PARAGRAPH: This starts a new paragraph with no blank line added
above it.<br />
<br />
Stan Hilliard<br />
==== END
I hope the above information is a clue to what is wrong. Here are some
other facts that I learned from my experimenting:
The superparagraph does not happen when I post with my laptop.
(Windows 7, NoScript 1.9.9.47 and Firefox 3.6 or IE8 browsers.)
The superparagraph does not happen when I post with the IE8 browser on
my desktop PC. (Windows XP.)
The superparagraph only happens when I post with Firefox 3.6/NoScript
1.9.9.47 on my desktop PC. And it only happens on one of the many
forums that I have used: windows7forums.com. The administrators of
windows7forums.com closed my discussion because they could not
reproduce my results from their end. They claimed it my description
"is either is a ploy or is completely nonsensical."
Does anyone here understand what is going on that messes the
formatting? Information will be appreciated.
Stan Hilliard
Fri Feb 19 11:11:49 CST 2010 |
1 |
Fri Feb 19 11:11:49 CST 2010
by Stan |
- XP Pro power options
-
Hello there,
On an XP Pro sp3 Dell machine, although I set the power options and
power schemes to never and also disabled hibernate mode it still goes
into standby mode, what could be the problem?
Thank you, T
Fri Feb 19 10:57:35 CST 2010 |
5 |
Fri Feb 19 10:57:35 CST 2010
by Tester |
- Why does Outlook Express hide attachments from one Sender
-
My home Outlook Express email hides attachments from my work Outlook
email account/address. The email message shows up fine, but with no
appearance of an attachment (no paper clip, no x'd out box, nothing).
My home OE receives attachments from others at the office just fine.
To bypass this, at work I send emails with attachments to a co-worker,
and have the co-worker forward that message to my home OE; which
arrives just fine.
I say "hides attachments" because if from OE I view the Properties of
the message, and Message Source, I see reference to the attachment,
and the message size reflects the attachment. So I believe the
attachments make the trip - but is somehow hidden by my local OE.
I've tried sending plain text, HTML, and rich text. All show up fine
- but no attachment.
My work email address is not a blocked sender on my home OE.
My work email address is defined in my home OE address book.
My home OE is 6.00.2900.5512 running on Windows XP 5.1 Service Pack 3.
Obviously, I'd like to fix this problem and be able to receive
attachments from myself at home. Help!?
Fri Feb 19 10:39:39 CST 2010 |
5 |
Fri Feb 19 10:39:39 CST 2010
by Ferrell |
- Task Scheduler wakes computer on NO TASK days
-
We have Task Scheduler set to run a task M, T, W, T at 2AM.
The "Wake the computer to run the task" is checked as the computer is
usually in hibernate at this time.
On the days that no task is scheduled (F, S, S) the computer resumes from
hibernate at 2AM.
The task DOES NOT RUN (as it is not scheduled). There is no entry in the
Task Schedule log for these days (and there shouldn't be) and the return to
hibernate after the task completes does not kick in as it does on the days
that a task is scheduled.
Why is the computer waking on the no event days (and it is not even
returning to hibernate)?
We have other computers with the same task schedule that are working as
scheduled.
I have confirmed that it is the task that is waking the computer (and not a
BIOS setting, etc). If I disable the task the computer does not wake.
I have also tried deleting and recreating the task.
The computer is running Windows XP Service Pack3.
Fri Feb 19 09:48:15 CST 2010 |
7 |
Fri Feb 19 09:48:15 CST 2010
by Ron |
- CHKDSK runnes in read only mode
-
When running CHKDSK I get a message stating that it will run in read only
mode because the F parameter is not specified. so how do I specify the F
parameter and what specification should I set in order to get out of read
only.
Being a bit of a novice am I playing with fire?
Fri Feb 19 09:22:01 CST 2010 |
8 |
Fri Feb 19 09:22:01 CST 2010
by Mike |
- Application Hang when Domain is not present
-
Hello,
I have 25 laptops part of my domain. Here is an issue that laptops
are experiencing:
As long as they are connected to the network in the office,
everything (anything in START menu) works marvelous and without any
issues.
When the laptop is off site and as long as they are not connected to
any LAN or WiFi network, everything (anything in START menu) works
without any problem.
However, as soon as a laptop is off site and connected to WiFi or
LAN, and if START menu is launched or any Office applications on the
desktop are launched everything freezes. It takes about a minute or
two for things to start working again.
I have looked in Event Viewer >> Application and the following three
errors are present:
Event ID 1000, Could not execute the following script \\Domain-
Name\sysvol\Domain-Name\scripts\hidedocs.vbs. The network location
cannot be reached.
Event ID 1000, Could not execute the following script \\Domain-
Name\sysvol\Domain-Name\scripts\logon.vbs. The network location
cannot be reached.
Event ID 1054, Windows cannot obtain the domain controller name
for your computer network. (The specific domain either does not
exist or could not be contacted) Group Policy processing aborted.
It is clear that the machine is trying to contact the domain and
execute scripts. I have looked up these Event IDs on Microsoft's
website and none of the solutions they have provided has helped so
far.
Is there anyway (possibly in GPO settings) that a setting can be
activated or deactivated to make the laptop realize that it is off
site, so the applications don't hang when connected to a network
other than domain in the office?
Is there any other solution for this issue that anyone may be able to
suggest?
Any help would be appreciated.
Fri Feb 19 09:15:01 CST 2010 |
4 |
Fri Feb 19 09:15:01 CST 2010
by meetamul |
- Vista Upgrade
-
Hello...
when I attempted to upgrade from Windows XP to Vista I experience the
following problems.
But the hardware compatibility I have met.
Now the problems:
- Ran the DVD and attempted a basic upgrade _corrupted file at 80% of
install from DVD~are versions used was 32-bit
-" " basic upgrade_fail
-" "full installation_fail -
finished the installation and rebooted but did not upgrade returned back to
windows XP
-" "finally the installation with
Ultima finished the installation and rebooted but did not upgrade returned
back to windows XP
Basically, if I attempt to do an upgrade or a full installation it will go
through all of the processes but when rebooting the system returns to Windows
XP.
Thanks you>>>>>
--
astro44
Fri Feb 19 07:56:01 CST 2010 |
6 |
Fri Feb 19 07:56:01 CST 2010
by Jessicaaolcom |
- Monitor Processing?
-
In XP SP3, is there a program or programs that I can install and run
to hopefully reveal resource (mainly time) hogs? Say, in the form of
a graph or some such?
Every so often my machine slows down suddenly and for long periods
(hours). I have looked at Task Manager, but that only shows (to me
anyway) the processes executing, but that's all.
Since I can shut down and re-boot to get things running at normal
speed again, I really would like to determine what the problem is.
a
Fri Feb 19 06:33:55 CST 2010 |
9 |
Fri Feb 19 06:33:55 CST 2010
by aaaaa |
- SP3 issues
-
A friend's son's machine is relatively new for XP (2005), but it is sorely
lacking in RAM, something that will be remedied as soon as Crucial delivers
on Monday. It was also wildly inundated with spyware, etc., but no viruses
according to Avast! Took a couple of days, but it seems relatively clean
now. Probably some permanent damage, but clean reinstall is something I'm
trying to avoid.
Meanwhile, being an impatient sort of person, I still tried to install SP3
before upping the RAM. The install failed at first due to permissions issues
which I thought I had remedied using SUBINACL as described here:
http://www.askvg.com/windows-xp-service-pack-3-sp3-setup-error-access-is-denied
The install actually finished after several hours -- 256MB RAM for WinXP is
a
crime, Dell should be held responsible for even allowing such a
configuration. Anyway, when I rebooted, it showed itself updating things
before logging on (the way Windows Updates often do.) But after logging on,
two command windows popped up. One did whatever and went away quickly, but
the other one showed a dozen or two responses, all of them "Access denied"
(may not be the exact phrase.)
I plan to reinstall SP3 when the new RAM arrives (unless that is
contraindicated), but I suspect that won't solve this issue. My assumption
is that the errors mean that the install wasn't entirely successful, but I'm
not stuck on that. Maybe the responses are expected in certain
circumstances. Still, if there is anything more I can do to ensure a clean
installation, please tell me all about it (or them.)
Much thanks,
--
Ronin
Fri Feb 19 03:32:09 CST 2010 |
42 |
Fri Feb 19 03:32:09 CST 2010
by Ronin |
- Filter to rename file based on days-since calculation
-
Is there a Windows filter which would enable me to take a base date
and insert the number of days since that date into my filename? For
example, using January 1, 2010 as a base date, I would like to be able
to take a file named, say,
"20100103 (n days since Jan 1) - file name.xyz"
and rename it to
"20100103 (2 days since Jan 1) - file name.xyz"
Thanks!
Fri Feb 19 02:58:14 CST 2010 |
0 |
Fri Feb 19 02:58:14 CST 2010
by Dilip |
- How to enable Undock button
-
Hi There,
I've reinstalled my laptop, but did not do so while connected to my docking
station, now the Undock button does not appear in my start menu. How can I
enable this?
Thank you.
Fri Feb 19 02:39:01 CST 2010 |
0 |
Fri Feb 19 02:39:01 CST 2010
by ReubenRinquest |
- Lost dual monitor capability in XP
-
I had XP Pro running with dual monitors for a couple of years,
switched out monitors from time to time and no problem. I've got an
Intel 2.8 MB with onboard video connected to one monitor, and an ATI
Rage Pro to the other monitor. Worked great till I had to replace the
hard drive and reinstall XP Pro. I'm running SP3 with all updates.
Now what happens is, whichever video adapter I make primary in the
BIOS, XP comes up on it, with the drivers okay, and the non-primary
one XP detects but Device Manager says the driver isn't installed.
And nothing I can do will make it accept the driver for the non-
primary one. But if I reboot and change the primary video adapter,
then it comes up with the other adapter & monitor just great and the
FIRST one is now failing to start.
When I go to Settings on Display Properties, I only see one monitor in
either case.
I've tried taking out the ATI and starting without it, then and
putting it back and restarting, no change. I don't know why this
install of XP will only accept the primary video adapter and not a
second one.
Thu Feb 18 21:22:09 CST 2010 |
12 |
Thu Feb 18 21:22:09 CST 2010
by Bob |
- add password protection to windows xp
-
When I first set up my computer I made it so I don't need a password to
login. however, I need to change this now so i can add the screensaver
password protection that is required elsewhere. How do I add the login
password protection for a user of my PC? Once I do this, the screensaver
password protection checkbox or whatever should appear, according to what I
have read elsewhere on this site. I do not have a professional edition of
software. Hope you can help!
Thu Feb 18 19:31:01 CST 2010 |
1 |
Thu Feb 18 19:31:01 CST 2010
by Mich |
- move quick launch
-
Hi can someone tell me how to move the quick launch bar to the center of
the taskbar the right way.
I have done it some how by sliding one icon to the left and sliding it
back to the right fast so it jumps over the little dashed line but it is
by acident when it works.
There must be a right way to do this ...
XPpro.
Thank you for any help
Bob C
Thu Feb 18 19:29:33 CST 2010 |
5 |
Thu Feb 18 19:29:33 CST 2010
by marcasp |
- Exception
-
XP SP3
I got this error pop up box intermittently from last week:
Visual Studio Just-In-Time Debugger
--------------------------------------
An unhandled win32 exception occurred in explorer.exe[440]
Possible Debuggers:
New instance of Visual Studio 2008
Yes, I have install Visual Studio 2008, 2 months ago.
Thu Feb 18 17:56:12 CST 2010 |
0 |
Thu Feb 18 17:56:12 CST 2010
by Alan |
- Icons don't update when default program changed
-
Suppose I have a file type (such as .cpp or .vhd) that is opened by
program X by default. Then I change the default program to Y by
selecting "Open With...", choosing a new program, and checking "Always
use this program". Whenever I do this, I've noticed that the icon for
files of that type does not update to Y, but instead stays with X's
icon. Is there a way to "refresh" the system so that it associates
the correct icons with file types?
-J
Thu Feb 18 17:40:24 CST 2010 |
0 |
Thu Feb 18 17:40:24 CST 2010
by mach7 |
- Icons don't update when default program changed
-
Suppose I have a file type (such as .cpp or .vhd) that is opened by
program X by default. Then I change the default program to Y by
selecting "Open With...", choosing a new program, and checking "Always
use this program". Whenever I do this, I've noticed that the icon for
files of that type does not update to Y, but instead stays with X's
icon. Is there a way to "refresh" the system so that it associates
the correct icons with file types?
-J
Thu Feb 18 17:38:08 CST 2010 |
0 |
Thu Feb 18 17:38:08 CST 2010
by mach7 |
- DESCARGAS - ANTIVIRUS GRATIS 8000
-
Muchos problemas de rendimiento y seguridad de tu computador son causados por
virus maliciosos, la mejor forma de combatir esto es tener instalado un
Antivirus reconocido y actualizado en tu computador
Descarga gratis Antivirus en:
http://antivirus-gratis-descarga.blogspot.com/
Links de contenido del sitio web:
http://antivirus-gratis-descarga.blogspot.com/
http://antivirus-gratis-descarga.blogspot.com/2009/08/que-es-un-antivirus.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/descarga-gratuita-de-antivirus.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/objetivos-del-antivirus.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/funciones-del-antivirus.html
http://antivirus-gratis-descarga.blogspot.com/2010/01/cifrado-generacion-de-claves.html
http://antivirus-gratis-descarga.blogspot.com/2010/01/critografia-simetrica-y-criptografia.html
http://antivirus-gratis-descarga.blogspot.com/2010/01/encriptacion-o-cifrado-estandar-de.html
http://antivirus-gratis-descarga.blogspot.com/2010/01/criptografia-cifrar-y-descifrar.html
http://antivirus-gratis-descarga.blogspot.com/2010/01/zonealarm-cortafuegos-software-que.html
http://antivirus-gratis-descarga.blogspot.com/2010/01/pf-packet-filter-paquete-de-cortafuegos.html
http://antivirus-gratis-descarga.blogspot.com/2010/01/firestarter-cortafuegos-personal-libre.html
http://antivirus-gratis-descarga.blogspot.com/2010/01/e-box-un-servidor-de-red-unificada-para_08.html
http://antivirus-gratis-descarga.blogspot.com/2010/01/todo-sobre-avira-antivirus.html
http://antivirus-gratis-descarga.blogspot.com/2009/12/falsa-alarma-de-virus.html
http://antivirus-gratis-descarga.blogspot.com/2009/12/como-eliminar-la-aplicacion-enganosa.html
http://antivirus-gratis-descarga.blogspot.com/2009/12/nuevos-virus-detectados-por-trend-micro.html
http://antivirus-gratis-descarga.blogspot.com/2009/12/virus-ericsson-amenaza-peligrosa-tipo.html
http://antivirus-gratis-descarga.blogspot.com/2009/12/panda-antivirus-pro-2010.html
http://antivirus-gratis-descarga.blogspot.com/2009/11/ventajas-del-antivirus-zonealarm.html
http://antivirus-gratis-descarga.blogspot.com/2009/11/zone-alarm-extreme-security-antivirus.html
http://antivirus-gratis-descarga.blogspot.com/2009/11/antivirus-dr-web-descarga-gratuita.html
http://antivirus-gratis-descarga.blogspot.com/2009/11/f-prot-antivirus-descarga-una-version.html
http://antivirus-gratis-descarga.blogspot.com/2009/11/descarga-aqui-la-ultima-version-del.html
http://antivirus-gratis-descarga.blogspot.com/2009/11/antivirus-microsoft-security-essentials.html
http://antivirus-gratis-descarga.blogspot.com/2009/11/virusscan-plus-antivirus-firewall.html
http://antivirus-gratis-descarga.blogspot.com/2009/11/per-antivirus-el-primer-antivirus.html
http://antivirus-gratis-descarga.blogspot.com/2009/11/virusfightger-virusfighter-filtro.html
http://antivirus-gratis-descarga.blogspot.com/2009/11/otros-antivirus-pc-tools-antivirus.html
http://antivirus-gratis-descarga.blogspot.com/2009/10/otros-antivirus-mx-one-antivirus-gratis.html
http://antivirus-gratis-descarga.blogspot.com/2009/10/norton-antivirus-dat-update-gratis.html
http://antivirus-gratis-descarga.blogspot.com/2009/10/panda-titanium-antivirus-gratis.html
http://antivirus-gratis-descarga.blogspot.com/2009/10/panda-cloud-antivirus-2009-00882.html
http://antivirus-gratis-descarga.blogspot.com/2009/10/avast-home-antivirus-free-edition.html
http://antivirus-gratis-descarga.blogspot.com/2009/10/nod32-antivirus-de-eset-gratis-descarga.html
http://antivirus-gratis-descarga.blogspot.com/2009/10/norton-antivirus-2010-gratis-descarga.html
http://antivirus-gratis-descarga.blogspot.com/2009/10/eset-llc-610-west-ash-street-suite-1900.html
http://antivirus-gratis-descarga.blogspot.com/2009/10/crimeware-el-crimen-del-siglo-xxi.html
http://antivirus-gratis-descarga.blogspot.com/2009/10/experimente-la-mejor-proteccion.html
http://antivirus-gratis-descarga.blogspot.com/2009/10/eset-smart-security.html
http://antivirus-gratis-descarga.blogspot.com/2009/10/eset-nod32-antivirus-microsoft-windows.html
http://antivirus-gratis-descarga.blogspot.com/2009/10/eset-smart-security-4-standard.html
http://antivirus-gratis-descarga.blogspot.com/2009/10/sistemas-digitales.html
http://antivirus-gratis-descarga.blogspot.com/2009/10/winpooch-programa-antivirus.html
http://antivirus-gratis-descarga.blogspot.com/2009/10/sokx-pro-10-programa-antivirus.html
http://antivirus-gratis-descarga.blogspot.com/2009/10/panda-security-sl-progama-antivirus.html
http://antivirus-gratis-descarga.blogspot.com/2009/10/norton-internet-security-symantec.html
http://antivirus-gratis-descarga.blogspot.com/2009/10/norton-antivirus-symantec-security.html
http://antivirus-gratis-descarga.blogspot.com/2009/10/windows-defender-microsoft-cortafuego.html
http://antivirus-gratis-descarga.blogspot.com/2009/10/microsoft-anti-virus-windows-live-one.html
http://antivirus-gratis-descarga.blogspot.com/2009/10/microsoft-anti-virus-msav-fue-un.html
http://antivirus-gratis-descarga.blogspot.com/2009/09/kaspersky-software-anti-virus.html
http://antivirus-gratis-descarga.blogspot.com/2009/09/eset-nod32-software-antivirus.html
http://antivirus-gratis-descarga.blogspot.com/2009/09/clamwin-antivirus-libre-para-microsoft.html
http://antivirus-gratis-descarga.blogspot.com/2009/09/clamav-antivirus-software-antivirus.html
http://antivirus-gratis-descarga.blogspot.com/2009/09/bitdefender-antivirus-caracteristicas.html
http://antivirus-gratis-descarga.blogspot.com/2009/09/avira-antivirus-productos-compania.html
http://antivirus-gratis-descarga.blogspot.com/2009/09/avast-antivirus-versiones.html
http://antivirus-gratis-descarga.blogspot.com/2009/09/avg-antivirus-novedades-y-evolucion-en.html
http://antivirus-gratis-descarga.blogspot.com/2009/09/que-es-la-heuristica-en-los-antivirus.html
http://antivirus-gratis-descarga.blogspot.com/2009/09/seguridad-informatica-y-antivirus.html
http://antivirus-gratis-descarga.blogspot.com/2009/09/noticias-sobre-seguridad-en-internet.html
http://antivirus-gratis-descarga.blogspot.com/2009/09/falsa-alerta-virus-que-copia-ventana.html
http://antivirus-gratis-descarga.blogspot.com/2009/09/noticias-sobre-las-memorias-usb-y-los.html
http://antivirus-gratis-descarga.blogspot.com/2009/09/antivirus-bitdefender-2010.html
http://antivirus-gratis-descarga.blogspot.com/2009/09/novedades-en-antivirus-cortafuegos-y.html
http://antivirus-gratis-descarga.blogspot.com/2009/09/antivirus-y-tipos-de-virus.html
http://antivirus-gratis-descarga.blogspot.com/2009/09/antivirus-gratis-avg-descarga-gratuita.html
http://antivirus-gratis-descarga.blogspot.com/2009/09/encuesta-asombrosa-revela-que-el-81-de.html
http://antivirus-gratis-descarga.blogspot.com/2009/09/segun-una-encuentas-online-el-80-de-los.html
http://antivirus-gratis-descarga.blogspot.com/2009/09/avast-professional-edition-requisitos.html
http://antivirus-gratis-descarga.blogspot.com/2009/09/descargar-antivirus-avast-professional.html
http://antivirus-gratis-descarga.blogspot.com/2009/09/mas-sobre-antivirus-avast.html
http://antivirus-gratis-descarga.blogspot.com/2009/09/novedades-en-antivirus.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/antivirus-kaspersky-internet-security.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/spyware-o-programa-espia.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/virus-informatico.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/cortafuegos-o-firewall_26.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/seguridad-informatica-y-en-internet.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/malware.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/virusfighter-pro-es-su-proteccion.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/antivirus-reconocidos.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/seguridad-informatica.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/que-es-un-antivirus.html?showComment=1259798464187
http://antivirus-gratis-descarga.blogspot.com/2009/08/que-es-un-antivirus.html?showComment=1264327441916
http://antivirus-gratis-descarga.blogspot.com/2008_11_01_archive.html
http://antivirus-gratis-descarga.blogspot.com/2009_08_01_archive.html
http://antivirus-gratis-descarga.blogspot.com/2009_09_01_archive.html
http://antivirus-gratis-descarga.blogspot.com/2009_10_01_archive.html
http://antivirus-gratis-descarga.blogspot.com/2009_11_01_archive.html
http://antivirus-gratis-descarga.blogspot.com/2009_12_01_archive.html
http://antivirus-gratis-descarga.blogspot.com/2010_01_01_archive.html
http://antivirus-gratis-descarga.blogspot.com/2010_08_01_archive.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/como-se-contagia-tu-pc-de-virus.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/activar-el-antivirus.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/actualizacion-yo-reemplazo-de-software.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/buscar-software-reconocidos-o-probados.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/capacitacion-y-formacion-del-usuario-de.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/copia-de-seguridad.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/cortafuegos-o-firewall.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/cuidados-de-la-red.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/danos-ocasionados-por-los-virus.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/formas-de-protegernos-de-los-virus.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/licencia-de-antivirus-activa.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/organizacion-de-la-informacion-y-copia.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/otros-planes-de-contingencia.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/otros-tipos-de-vacunas-informaticas.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/plan-de-contingencia.html
http://antivirus-gratis-descarga.blogspot.com/2009/08/vacunas-informaticas.html
http://antivirus-gratis-descarga.blogspot.com/2009/11/mapa-del-sitio-web.html
http://antivirus-gratis-descarga.blogspot.com/2008/11/sitemap.html
Thu Feb 18 16:31:02 CST 2010 |
2 |
Thu Feb 18 16:31:02 CST 2010
by antivirusgratis |
- Hyperlink
-
How can I add a hyperlink when I write something online?
Sol
Thu Feb 18 16:11:27 CST 2010 |
6 |
Thu Feb 18 16:11:27 CST 2010
by S1L1Y1 |
- desktop.ini
-
What purpose do 'desktop.ini' files have?
--
regards,
|\ /|
| \/ |@rk
\../
\/os
Thu Feb 18 15:57:22 CST 2010 |
6 |
Thu Feb 18 15:57:22 CST 2010
by Linea |
- Network Print Issue
-
Hello everyone, here's hoping someone can help. I have a user (running XP
SP3), who has this issue where when she tries to print to any network printer
(whether installed on server and shared, or installed locally by IP),
whatever application she's in hangs up. It happens in all apps, and all
network printers. No other users are having this issue when printing to
these same printers. She has a printer at her desk(USB) which this does not
happen with. so far i've tried: deleting drivers and ports,
reinstalling/remapping printers, removing network card from computer,
reinstalling. Here's where it's weird, if i log onto the computer as a
different user (for instance, the local admin account) the issue does not
happen. Coming across this obviously i thought deleting and recreating the
users profile on the computer would take care of it, nope, same thing. I'm
at my wits end, anyone have any ideas, i'd love to hear them (or see them)
Thank you.
Thu Feb 18 15:20:04 CST 2010 |
6 |
Thu Feb 18 15:20:04 CST 2010
by blaket81 |
- pinned items
-
Hi all,
where are the pinned items under the start menu located? I want to remove a
pinned item for all the users that logon to this machine.
Sher
Thu Feb 18 13:43:01 CST 2010 |
1 |
Thu Feb 18 13:43:01 CST 2010
by Sher |
- J K Defrag
-
I see that J K Defrag has been replaced my My Defrag - Is it still a good
defrag program or are there better ones?
Tony
Thu Feb 18 13:17:59 CST 2010 |
11 |
Thu Feb 18 13:17:59 CST 2010
by Tony |
- Windows XP Quick Launch bar
-
In Windows XP home edition using the clasic start menu how do I get
the Quick Launch bar to stay showing?
Every time I start Windows I have to go to the Start, Taskbar menu and
click to show the Quick Launch bar. Can't it be set to stay showing??
TIA
Thu Feb 18 13:08:27 CST 2010 |
5 |
Thu Feb 18 13:08:27 CST 2010
by kraut |
- can't delete program
-
Have a program: "DOGZ 5" (game) installed by daughter via disk and cannot
uninstall/delete.
I click START, CONTROL PANEL, ADD OR REMOVE PROGRAMS, highlight unwanted
program, click CHANGE/REMOVE and there is no response.
Other porgrams have been removed sucessfully. Only this one willl not go
away! HELP!!!
--
JohnB
Thu Feb 18 10:59:02 CST 2010 |
3 |
Thu Feb 18 10:59:02 CST 2010
by johnb |
- Rootkit author offer fix for MS patch problem
-
"According to security vendor Prevx, the authors of the rootkit which was
the cause of a large number of unbootable systems which applied the MS10-015
patch issued last week have issued a patch to fix the incompatibility."
http://blogs.pcmag.com/securitywatch/2010/02/rootkit_authors_issue_patch_fo.php
All your roots belong to us...
Thu Feb 18 10:20:49 CST 2010 |
11 |
Thu Feb 18 10:20:49 CST 2010
by HeyBub |
- WinXP Driver Issue
-
I have downgraded a Gateway M2614u laptop from Vista to WinXP. Gateway
has Vista drivers for this system on it's site, but no drivers for
WinXP. Nevertheless
I was able to find WinXP drivers on the net for everything except a
"Conexant HD
audio soft data fax modem with SmartCP". I have tried a ton of
different drivers
for this device including the Vista driver from Gateway for this
model, and one
from Microsoft/Windows Update. None will install correctly - modem
doesn't
work, yellow exclamation point on device in Device Manager.
I conclude that there must be multiple versions of this device (chip),
and either
there is no WinXP driver for it or I just haven't been able to
identify the correct
device and driver. Three questions:
-I've used Belarc Advisor, Everst and even Linux lspci to try to get
specific
model and version information on the device, but apparently the
information
I pick up is not sufficiently specific. Is there a way to get a more
exact
device ID or something that would enable me to track down the correct
driver?
-In the past I've used various internet driver download sites in
attempts
to solve this type of problem, and my experience has been that
they're
generally useless and sometimes even harmful. Is there such a site or
software utility that's really useful?
-If I can't find the driver, is there a way to disable the device
"completely"
in WinXP? Right now every time I boot the system Windows says "new
device found" and prompts me to try to install the driver - a cycle
I've
repeated many times in many different ways, with no luck ever.
Thu Feb 18 08:59:53 CST 2010 |
1 |
Thu Feb 18 08:59:53 CST 2010
by gus |
- 0x7c91b21a error
-
Hi,
I found a solution for an error message on start up that states that
memory could not be written at 0x7c91b21a 0x00000010. It appears the
latest update for Windows Media Player is causing this problem if the
Service, Windows Driver Foundation. is turned on. It needs to be
disabled. I found this at Bleeping Computers and this solution
worked for me. Cathy
http://www.bleepingcomputer.com/forums/topic261076.html
Thu Feb 18 06:41:05 CST 2010 |
0 |
Thu Feb 18 06:41:05 CST 2010
by cjp |
- Windows update failing
-
Hello,
I actually have 2 problems.
Problem number 1: In outlook when I try to add an attachment and I click on
the 'search in' field the add attachment windows freezes and doesn't come to
live. If I dont click on that field and try the rest it works except for that
field.
It is Windows XP pro, SP3 running Office 2003 Pro SP3.
I tried some stuff out for this problem but eventually I wanted to update
the system since he hadn't done it for over a year now. So I went to site of
windows and microsoft update and both came up with the error message
0x8024D007.
The following things I allready tried:
1->http://support.microsoft.com/kb/971058
2->Make batch and copy the following commands, and then paste them into
Notepad:
REGSVR32 WUPS2.DLL /S
REGSVR32 WUPS.DLL /S
REGSVR32 WUAUENG.DLL /S
REGSVR32 WUAPI.DLL /S
REGSVR32 MUCLTUI.DLL /S
REGSVR32 WUCLTUI.DLL /S
REGSVR32 WUWEB.DLL /S
REGSVR32 MUWEB.DLL /S
REGSVR32 QMGR.DLL /S
REGSVR32 QMGRPRXY.DLL /S
In Notepad, on the File menu, click Save As. In the Save as type list, click
All Files (*.*). In the File name box, type register.bat. Save the
Register.bat file to your desktop. Double-click the Register.bat file to
register the Windows Update files.
Try to install updates again.
---> No Success
3->There may be an issue with BITS so you try to register the following
system files: In Windows XP go to the Run item on the Start menu, and type:
regsvr32 qmgr.dll
regsvr32 qmgrprxy.dll
These files are associated with the Windows Update Service.
For 32-bit Windows enter the following lines:
net stop wuauserv
regsvr32 %windir%\system32\wups2.dll
net start wuauserv
--->It gave an error on qmgr.dll
4->wtsapi32.dll. I copied a fresh wtsapi32.dll to "c:\windows\system32".
The solution is to install WTSAPI32.DLL into c:\windows\system32! If you
can't find a copy of it, I believe you can use EXPAND.EXE (on your original
Windows disk) to replace it. The command would be, I think, EXPAND
WTSAPI32.DL_ c:\windows\system32
---> No success
5->Install BITS 2.0 and WinHTTP 5.1 for Windows XP
http://www.microsoft.com/downloads/details.aspx?displaylang=nl&FamilyID=b93356b1-ba43-480f-983d-eb19368f9047
---> Download worked but get an error again.
So right now I am kinda runnign out of ideas. Does anybody here know
something, otherwise we have to go to our last resort and well we don't want
to do that just yet.
Thanks in advance for taking your time for this post,
René Klomp
Thu Feb 18 05:15:01 CST 2010 |
2 |
Thu Feb 18 05:15:01 CST 2010
by Tridec |
- Getting rid of Norton (To Twayne) LightningSand.cfd corruption
-
Twayne was the most helpfull for my problem, but no one could tell me
WHAT is that damned LightningSand.cfd file that kept to get corrupted
after reboot.
It was in the NORTON 360 directory, but only present after the error.
Norton (Symantec) was no help at all, so after changing my disk and
rebulding Win from scratch,Ii finally obeyed the general advice :
'Get rid of Norton'
Well, I did on Feb 2, and instead used Avira Antivir.
Since then, NOT ANY PROBLEMS !!!
More, now the system stops in less than 1 minute (instead of 3), with
no error messages, and Avira found more than 30 'dormant' virus or
trojans (but not any active).
Jean-Paulo
Thu Feb 18 01:08:56 CST 2010 |
8 |
Thu Feb 18 01:08:56 CST 2010
by JeanPaulo |
Wed Feb 17 23:09:01 CST 2010 |
5 |
Wed Feb 17 23:09:01 CST 2010
by beargrass2 |