- Saving Outlook 2000 data when upgrading
-
I'm about to upgrade from Office 2000 to 2010. Can anyone suggest a way to
save my data (pst files, I think) is such a way that they can easily be
accessed after the upgrade?, perhaps a Word files?
Mon Aug 16 00:56:51 CDT 2010 |
1 |
Mon Aug 16 00:56:51 CDT 2010
by Bagwash |
- Outlook Attachment Blocking - Strange Behavior
-
Hello
Folks have sent me messages that have a sequence of files. For example
the message will have several attachments listed like this: 1.pdf.,
2.pdf,3.pdf.
It looks like MS Outlook reads the attachment as =93.pdf.=94 and =93.pdf,=
=94;
which is technically an unknown file extension, instead of reading
each attachment as a =93.pdf=94
I am able to view =93.pdf=94 attachments
Any ideas?
Thanks,
Anthony
Sun Aug 15 15:59:14 CDT 2010 |
1 |
Sun Aug 15 15:59:14 CDT 2010
by TonyB |
- Mac version
-
I know Outlook is going to replace Entourage as the PIM for the Mac
version of Office. Thus far I don't see a newsgroup for the Mac
version begging the question, does it make sense to start following
this one or will it be for Windows version only?
Fri Aug 13 18:54:42 CDT 2010 |
2 |
Fri Aug 13 18:54:42 CDT 2010
by Timothy |
- OL 2010: subfolders not sorting correctly
-
I'm not exactly sure what I did, but after I did "it," I found that
one of my subfolders is sorted out of order. Even after I ran
scanpst, the problem is still present:
Here is a partial list of subfolders:
Sales Process
Search Folders
Sent Items
2010 Status <- obviously out of order.
Strategy
Until "it" happened, the "2010 Status" folder was properly grouped
with other folders whose name started with "2010." Now I can drag
2010 Status into another folder as a subfolder. Then if I MOVE the
folder back to the main folder, 2010 Status sorts back to its wrong
position.
What do I do?
-AH
Thu Aug 12 22:38:40 CDT 2010 |
0 |
Thu Aug 12 22:38:40 CDT 2010
by Andrew |
- Bad user experience for Outlook 2010
-
In the new Office 2010 PRO, I have met many problems. Microsoft needs
to improve Office 2010 user experience. Here are my complains.
1. Ribbon interface is the only choice. You cannot get back to the
old interface. For many business people changes are a disaster. Not
everyone can spend months to adopt a new system. Where is my Printer
Preview icon? Where is my recall function? I cannot waste time to
find the new function or learn the new interface. I want the old
interface back.
2. Nonsense message box. When I close an opened attachment file in a
message without any change, why do I need to confirm Save/Don't Save/
Cancel? That's very ridiculous.
3. Unintelligent process for replying emails. When I open an
attachment and change the content, I have to save the attachment first
and attach it back in an new email. This is very dull. You should
put an option to let people reply or forward the email. Who is going
to forward an email before they check if the attachments have to be
modified or not?
Why Microsoft cannot heard what people want? Innovation is good;
however, over reengineering is not good. Please think for the user
who has no time to learn a new system. Otherwise, why don't I try to
use Apple's products? Please provide solutions for them.
Thu Aug 12 19:42:04 CDT 2010 |
4 |
Thu Aug 12 19:42:04 CDT 2010
by Cliff |
- Outlook 2007 and Hotmail
-
Is it possible for Outlook 2007 to synch with the Hotmail web server so all
my Hotmail web folders are equivalent to my Outlook 2007 folders? (Am I
asking the question correctly???)
Anyway, I cannot find a "synchronize" command in Outlook 2007 and my email
folders do not jive with my Hotmail account. Example: when I delete a
message from Outlook 2007 it's still on the server.... Help!!
Thanks.
EW
Thu Aug 12 19:21:17 CDT 2010 |
4 |
Thu Aug 12 19:21:17 CDT 2010
by Lone |
- How to make all Mail folder views identical?
-
Is there a way to set all of the Mail folders to the same view? The
same fields, in the same order, same widths, etc.?
I have dozens, if not hundreds, of folders. I've changed some of them
from time to time as I've figured out how I work best. Now I'd like to
be able to make them all the same and be able to changhe them all at
once if I need to in the future.
Tue Aug 10 10:03:26 CDT 2010 |
2 |
Tue Aug 10 10:03:26 CDT 2010
by Sesquipedalian |
- Outlook 2010: Unable to open an internet link in a received message
-
Whenever I try to click a link appearing in an email I get a message
saying someting like: "operation aborted due to limitations defined
for this computer. Contact your systems manager (it's in Norwegian so
I have to translate to the best of my ability.
My OS is Windows7. I use Norton Internet security, latest edition.
Can anyone tell me how to control this?
Jan Erik, Oslo, Norway
Sun Aug 08 10:22:56 CDT 2010 |
2 |
Sun Aug 08 10:22:56 CDT 2010
by Jan |
- MS outlook web access question
-
Hi
MS outlook web access question
**************************************
I have MS Outlook Web Access. I can only do plain text emails.
I am sure it is the latest version of MS Outlook Web Access as it is
from the alarge company.
The sys admin/ IT person at this company did not have an answer for
me.
I do not seem to find an editor to highlight words in yellow, or make
certain words in BOLD or change the size of the fonts etc.
Is this feature available in MS Ouloook Web Access? and how do I turn
it on?
Please let me know.
Thanks,
Ayesha Greene
Fri Aug 06 10:46:07 CDT 2010 |
1 |
Fri Aug 06 10:46:07 CDT 2010
by Ayesha |
- opening and infopath form and submitting data automatically
-
i am creating an infopath form. the user fills out the data on the form.
He sends it to person number two and they fill out section 2. then they
send the form to an email account (outlook) that exists inside the network
where the db is located. Currently, a user goes into outlook. opens each
email and then clicks the submit button on the infopath form.
???
Is there a way progam(vb.net or c# or vba) to open the form automatically,
and then create a macro or code to click or fire the submit button.
thanks in advance
--
______________________________________
Posted from http://outlook-center.com
Outlook forums, articles, tips.
Thu Aug 05 15:30:11 CDT 2010 |
0 |
Thu Aug 05 15:30:11 CDT 2010
by zwheeler |
- outlook 2010 view full message source (headers + source)
-
hello,
in outlook 2003 i could add a registry hack to view the full source of
an email message, with the SaveAllMIMENotJustHeaders registry key.
i've tried it in Outlook 2010 but it does not seem to work?
does anybody know how i can see the complete source of an email
message in outlook 2010?
i need this to let my spamassassin learn from the spam messages that
get through.
thank,
stig
Thu Aug 05 02:08:11 CDT 2010 |
1 |
Thu Aug 05 02:08:11 CDT 2010
by Stig |
- How do I stop Facebook importing birthdays into Outlook 2007
-
Just now I got a HUGE long list of overdue appointments pop up. All of them are
people's birthdays and all are from Facebook.
In one instance alone, a friend has his birthday listed 4 times.
How can I stop Facebook sending this info to Outlook?
It's really starting to annoy me, now.
Wed Aug 04 21:48:07 CDT 2010 |
6 |
Wed Aug 04 21:48:07 CDT 2010
by Marts |
- Lookup by first names owa versus client
-
Our workplace uses Outlook 2007. When I use the client at work I have
to look people up by last name (the ones in the corporate directory)
i.e. I've type the first few letters of their last name for Outlook to
complete the name.
but when I use web access from home I find I can type in the first few
characters of their first name to achieve the same result.
What is the setting to do the same on client?
Thanks
Wed Aug 04 19:09:49 CDT 2010 |
0 |
Wed Aug 04 19:09:49 CDT 2010
by Pakku |
- 2007-Import saved msg from other folder
-
Hello All.
I'm hoping someone has an answer to this dilemma.
To save space within our E-mail account, Outlook 2007 messages were saved as
*.msg in a folder with various other documents. Is there anyway to bring
these individual messages back into the Outlook 2007 Inbox ?
Thanking you in advance any and all help.
MamaBee
Tue Aug 03 12:46:12 CDT 2010 |
0 |
Tue Aug 03 12:46:12 CDT 2010
by MamaBee |
- Outlook 2010 crashes when opening Mac mails
-
I'm having this problem with Outlook crashing whenever I click an
email from certain friends who use Mac Mail. If I disable the preview
pane, it doesn't crash until i open the email.
This only happens on my XP machine (my main machine), not on my
Windows 7 netbook.
I searched online and see i'm not the only one having this issue. It
seems pretty fundamental, but I have yet to see a solution.
Does anyone know of a way around this problem? I hate the thought of
abandoning Outlook, but these crashes are sucking up way too much time
and effort
gary
Tue Aug 03 12:30:56 CDT 2010 |
2 |
Tue Aug 03 12:30:56 CDT 2010
by Gary |
- Outlook saves sent messages when it is not supposed to
-
I have Outlook 2003 and Windows Vista.
Under Email options, I=92ve unselected the =93save copies of messages in
Sent Items folder=94
I created a rule to be applied when receiving a message:
If the subject contains vuvuzela, permanently delete the message and
reply using an .oft file whose subject line contains vuvuzela.
Then I created a rule to be applied after sending a message:
Move a copy to the Sent Item folder except if the subject contains
vuvuzela
If I send a message with vuvuzela in the subject, the item is not
saved.
However, when replying using the .oft file, it does save the message
in the Sent Items folder.
I can I correct this?
Can it be done using VBA?
Mon Aug 02 15:53:19 CDT 2010 |
1 |
Mon Aug 02 15:53:19 CDT 2010
by Frank |
- Outlook Search
-
I've tried about everything I can to fix the search. Seems stuck indexing.
Can I reinstall?
What would be the steps?
And how do i preserve my e-mails, contacts, etc?
thanks in advance
Submitted via EggHeadCafe - Software Developer Portal of Choice
Make The WebClient Class follow redirects and get Target Url
http://www.eggheadcafe.com/tutorials/aspnet/70511872-c3aa-4e92-a7d7-dd4b09881af5/make-the-webclient-class-follow-redirects-and-get-target-url.aspx
Sun Aug 01 16:58:58 CDT 2010 |
0 |
Sun Aug 01 16:58:58 CDT 2010
by trevor |
- Outlook Search
-
I've tried about everything I can to fix the search. Seems stuck indexing.
Can I reinstall?
What would be the steps?
And how do i preserve my e-mails, contacts, etc?
thanks in advance
Submitted via EggHeadCafe - Software Developer Portal of Choice
A Comparison of Managed Compression Algorithms
http://www.eggheadcafe.com/tutorials/aspnet/71485ecc-2d2d-435a-9c35-3d12b279f9ae/a-comparison-of-managed-compression-algorithms.aspx
Sun Aug 01 16:58:26 CDT 2010 |
1 |
Sun Aug 01 16:58:26 CDT 2010
by trevor |
Sun Aug 01 11:39:08 CDT 2010 |
0 |
Sun Aug 01 11:39:08 CDT 2010
by jjnotme |
- How can I see which lists a contact is a member of?
-
Hello,
In Outlook 2007, is there a way to see which distribution lists a
contact is a member of? We have lots of lists. We want to be sure that
if we delete a contact in a group, instead of just removing it from
the group, that the contact doesn't exist in other groups as well.
Even a way to export to Excel would be ok, if there's nothing else.
Thanks,
- Alan.
Sun Aug 01 06:43:46 CDT 2010 |
3 |
Sun Aug 01 06:43:46 CDT 2010
by Alan |
- Can I stop Outlook re-naming existing contacts with GAL name?
-
Hello,
I've imported some contacts from a PST file to Outlook 2007. On many
of the contacts, I added descriptions after their name, e.g., "John
Doe (SALES)". Now I find that Outlook appears to have automatically
resolved the addresses to the GAL and re-named the imported contacts
with the GAL name! So the "(SALES)" tag has been dropped in the
example above.
Does Outlook do that and if so how to prevent it from doing that?
Thanks,
- Alan.
Sun Aug 01 06:40:06 CDT 2010 |
0 |
Sun Aug 01 06:40:06 CDT 2010
by Alan |
- repetitive windows update
-
Despite my Outlook 2007 is correctly installed and working, from
several days I am receiving KB980376 security update, that is unable
to install as "unable to find the related product".
Any idea on how to stop this bothering routine ?
I tryed to install manually with Windows XP Pro safe install : no
result!
Thanks
Manlio
Thu Jul 29 12:26:48 CDT 2010 |
0 |
Thu Jul 29 12:26:48 CDT 2010
by Manlio |
- use isc calender file on local filesystem
-
Hi,
I want to use ICS calenderfiles in outlook 2010. Let's say one file is
at c:\calender.ics.
What URL do I use in Outlook? There is only one example
"webcal://www.xyz.com/calender.ics". But I want to use the local
filesystem. I have tried several possibilities but nothing worked.
TIA Martin
Thu Jul 29 02:52:37 CDT 2010 |
0 |
Thu Jul 29 02:52:37 CDT 2010
by Martin |
- AutoArchive
-
I'm trying to automatically archive all emails in a certain folder in
my Inbox to a folder outside of Outlook on a shared drive. I have
AutoArchive set up under the properties of the Inbox folder, but none
of the emails are being moved to the folder where I would like them.
Is there any reason Outlook would be unwilling to export them like
that?
Thanks
Wed Jul 28 07:06:15 CDT 2010 |
0 |
Wed Jul 28 07:06:15 CDT 2010
by Benjamin |
- Sending daily emails automatically
-
I am trying to send a daily email message automatically. For example
a safety message that will not change but needs to be sent everyday.
Rather than spend time each day cutting and pasting the message and
sending, can it be set up to send this message automatically? Is this
possible to do?
Tue Jul 27 07:44:27 CDT 2010 |
1 |
Tue Jul 27 07:44:27 CDT 2010
by spmu |
- Update on problems sending emails
-
It appears that the problem that I'm having with bounced emails appears to be
only to email addresses in the .au domain. I just sent a couple of emails to non
.au domains and they didn't bounce.
Now, it may be an ISP thing or it may be Outlook. I've contacted the ISP who
will look into it. But in the meantime, if it's not them and it's Outlook, what
could stop it sending emails to a specific country address?
Nothing has changed in the settings from overnight to today.
Thanks,
Mon Jul 26 23:01:37 CDT 2010 |
6 |
Mon Jul 26 23:01:37 CDT 2010
by Marts |
- Outlook Can't Send Messages
-
This morning I fired up Outlook 2007 (running under Windows 7). It retrieved all
new emails.
I then tried to post a new email, (not a reply). However, the nano-second that I
clicked on "Send" I received a reply from "System Administrator".
It said this:
Your message did not reach some or all of the intended recipients.
Subject: The Train Meltdown
Sent: 27-Jul-10 1:18 PM
The following recipient(s) cannot be reached:
xxxxx@xxxxx.com.au on 27-Jul-10 1:18 PM
None of your e-mail accounts could send to this recipient.
I have 3 active email accounts. I tried sending it from each of them with the
same result. They all send via different SMTP servers, too.
I then tried sending emails to other people. Same result.
When I clicked on "Message Properties" to view the headers from this mythical
System Administrator, there were none. The field where you view them is blank.
I'm having to use webmail at the moment to send or to reply to emails.
Everything was fine last night when I turned the computer off.
I'd really appreciate any suggestions to troubleshoot this one as I've run out
of ideas.
Thanks.
Mon Jul 26 22:28:12 CDT 2010 |
3 |
Mon Jul 26 22:28:12 CDT 2010
by Marts |
Mon Jul 26 10:59:42 CDT 2010 |
3 |
Mon Jul 26 10:59:42 CDT 2010
by XX |
- Foreign Alphabets
-
I get plenty of junk email. I'm sure that anyone reading this would
feel the same. MY pet peeve are the few items a day in some foreign
alphabet that I don't even recognize, nor do I want to.
Is it possible to create a rule that would dump that stuff into Delete
immediatly?
This is a minor pain but......................
Thanks.
Sun Jul 25 15:36:32 CDT 2010 |
1 |
Sun Jul 25 15:36:32 CDT 2010
by Ira |
- O2003 New Toolbars Saved Where?
-
I have XP with O2003 on one computer. Just got a new computer with W7
and installed O2003. I copied over the "outcmd.dat" file and I can see
my data (e.g. views) so I know its using the correct "outcmd.dat"
file.
However two custom toolbars I created are not shown nor are they in
the customized toolbar list. Are custom toolbars saved in a different
location?
Thanks
Shawn
Sat Jul 24 17:22:28 CDT 2010 |
1 |
Sat Jul 24 17:22:28 CDT 2010
by srm |
- Automating Paste In Outlook 2007
-
I have some code which automates an Edit | Paste in Outlook 2003, as
follows:
objOutlookMsg.GetInspector.CommandBars.Item("Menu
Bar").Controls("Edit").Controls("Paste").Execute
where objOutlookMsg is an object variable set to an e-mail message.
This code works fine in 03. However, it results in an "Automation Error" in
Outlook 2007.
How do I automate an Edit | Paste in Outlook 2007?
Thanks!
Neil
Fri Jul 23 00:21:59 CDT 2010 |
10 |
Fri Jul 23 00:21:59 CDT 2010
by Neil |
- retrieving attachments from multiple email messages in one attempt
-
If I have emails from Person 1, Person 2....Person 110 and each email
has an attachment is there a way in Outlook 2007 to get download all the
attachments from Person 1...Person 110 in one attempt in one folder
instead of manually going to each email message and downloading them
individually.
Thu Jul 22 10:42:49 CDT 2010 |
2 |
Thu Jul 22 10:42:49 CDT 2010
by g |
- Insert File As Text Using Automation
-
Anyone know how to insert a file as text in Outlook 03 using Automation? I
have my Outlook object and all, and I just need to know the methods for
inserting a file as text in the body of the document (same as File | Insert
| As Text), not as an attachment.
Thanks!
Tue Jul 20 19:35:44 CDT 2010 |
1 |
Tue Jul 20 19:35:44 CDT 2010
by Neil |
- Managing forms
-
Outlook 2007
This should be easy but I have not been able to find the answer.
I have created some forms (way too many). They all seemed to work properly.
I have, I think, deleted many of them in the Template folder.
Unfortunately, they still appear in the list of forms in "Personal Forms
Library." Worse, when I select ANY form in that library, I get
"The form you selected cannot be displayed. The form required to view
this message cannot be displayed."
In my search, I found a reference to deleting all files in
Users|xxxx|AppData|Microsoft|Forms. I did that - it didn't help.
Suggestions please.
Tue Jul 20 10:29:16 CDT 2010 |
0 |
Tue Jul 20 10:29:16 CDT 2010
by J |
- After renaming a mailbox, Outlook only shows Inbox messages upto the
-
Hello,
Having a weird problem. I renamed a mailbox-enabled functional account
in active directory (display name, last name, DN) but I didn't change
the Exchange alias. Now when I add the mailbox as a delegate to my
folder list in Outlook, it only shows mail upto the time of the name
change in the Inbox. If I click on File - Open other user's folder and
choose the Inbox that way, it shows all the mail. Any idea? I've done
all the obvious things like creating a new profile, deleting the forms
cache, but no change.
Outlook 2003/XP with Exchange 2003.
Thanks,
- Alan.
Tue Jul 20 09:49:37 CDT 2010 |
0 |
Tue Jul 20 09:49:37 CDT 2010
by Alan |
- Reset Outlook 2007 to default
-
Hi
I use a laptop to teach end users Outlook 2007, but find it extremely
time consuming to set outlook back to it's original "factory" state
after each course. At the moment I do the following:
Delete the old training profile and recreate it
Delete the training pst file
Rename the OUTCMD.DAT file.
Run the Outlook.exe file with all the reset and clean switches
Recopy my sample pst file that contains some messages etc to use in
the training
However there are still settings such as shortcuts on the navigation
bar, the size of the navigation bar, the minutes interval on the
calendar etc that are not set back to default.
Is there a macro or an exe file available anywhere that I could use to
clear settings? In Outlook 2003, the detect and repair was very
helpful in this regard!
Thanks
Heather
Tue Jul 20 00:58:39 CDT 2010 |
0 |
Tue Jul 20 00:58:39 CDT 2010
by Fev |
- Increase size of font in message body
-
I must have done something wrong so now I need help. How do I
increase the size of the font in the body of an email? It is so
smalll now, I can barely read it.
TIA - Hal
Mon Jul 19 15:41:33 CDT 2010 |
1 |
Mon Jul 19 15:41:33 CDT 2010
by Hal |
Mon Jul 19 14:10:16 CDT 2010 |
3 |
Mon Jul 19 14:10:16 CDT 2010
by jjnotme |
- Bounce Email plug-in, or rule? Anti-Stalking help, please
-
We are running Outlook 2007 with Exchange at home
2 Users
1 with Windows XP and 1 with a mac
We want to nominate 1 specific email address to NOT get any mail from.
We want to bounce it, with the end desire being that "you cannot get to
me", rather than the email just being auto-deleted.
Creating a rule for "trash" does not get the hint back to them in the
same manner.
The Exchange service offers a blacklist function, but not a bounce-back
to a specific email address.
Anyone have any ideas?
Mon Jul 19 09:17:19 CDT 2010 |
10 |
Mon Jul 19 09:17:19 CDT 2010
by Stephen |
- Problems with Archive file location - Outlook 2007
-
Hi all,
By default, Outllok 2007 Archive.pst file is located in
C:\Users\[user]\AppData\Local\Microsoft\Outlook folder
but I want to keep it in MyDocuments
One of reasons is that I noticed Windows 7 Backup has difficulties restoring
files to C:\Users\[user]\AppData folder.
So I moved the Archive.pst file to the new, desired location, made
appropriate changes
in Control Panel/Mail (32-bit).
Everything is great until I restart my computer (relogin does not cause
problem).
After restart system adds Archive file to the original location, so then I
have two archives, but messages get archived to the wrong one.
Any ideas how to permanently move Archive to the desired location?
Thanks,
Thomas
Wed Jul 14 14:13:22 CDT 2010 |
2 |
Wed Jul 14 14:13:22 CDT 2010
by Thomas |
- Outlook moving messages to junk e-mail folder
-
Hello group!
Sorry for a silly question but I'm still new to outlook topics...:)
Outlook keeps moving some of the emails I receive to the Junk E-mail
folder. It's a bit annoying because some of these messages are really
important to me and sometimes I discover that they are there after a
couple of days...
Is it possible do something with it? Thanks in advance.
G.O.
--
______________________________________
Posted from http://outlook-center.com
Outlook forums, articles, tips.
Wed Jul 14 04:27:32 CDT 2010 |
4 |
Wed Jul 14 04:27:32 CDT 2010
by g |
- moving Contacts
-
Vista Home Premium / Outlook 2007
This should be easy but I can't find the answer.
I want to move all Contacts in one pst to another pst on a separate PC.
I can find how to move a pst and I can find how to move contacts one at
a time but not how to move all contacts. If it is easier, just point me
to the documentation.
Tue Jul 13 08:51:04 CDT 2010 |
3 |
Tue Jul 13 08:51:04 CDT 2010
by J |
- Inbox is filled with folders of people in contact list
-
In Outlook 2007, somehow the user has folders for all the people in his
contact list(and a Sent Folder below each person's name).
The structure of the mailbox looks like
Inbox
John Done
Sent
Mike Jones
Sent
and so on.
What could have caused this and how can this be fixed? The user does not
recall installing any program/add in or doing something in his Outlook
2007 to cause this?
Mon Jul 12 18:07:59 CDT 2010 |
0 |
Mon Jul 12 18:07:59 CDT 2010
by John |
Sun Jul 11 22:01:02 CDT 2010 |
0 |
Sun Jul 11 22:01:02 CDT 2010
by uhill |
- Change user-defined fields from contact list (2007)
-
I have defined a user-defined field in folder named NDA as a Yes/No
field to indicate whether certain contacts have a signed NDA on file.
I have added that field to my maon contact view.
Now, is there some way that I can click on that field to toggle it
on/off?
I am using Office 2007 Pro.
Wed Jul 07 20:06:33 CDT 2010 |
0 |
Wed Jul 07 20:06:33 CDT 2010
by FivePoundBag |
- new emails not indicated in subfolders
-
Greetings
Using Outlook 2010, when mail arrives in the Inbox, a number appears next to
"Inbox" to tell me how many unread mails are there - great!
I have set up a number of subfolders underneath my Inbox, and have set up
rules to divert emails from particular people into their own folder. It all
works fine, except that when a mail arrives in one of those subfolders, no
numbers appear to let me know there is unread mail.
Is there a setting somewhere that will let me have this facility?
Many thanks
JP
__________ Information from ESET NOD32 Antivirus, version of virus signature database 5259 (20100707) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
Wed Jul 07 11:17:55 CDT 2010 |
1 |
Wed Jul 07 11:17:55 CDT 2010
by wasted |
- Locate a mail folder in hierarchy
-
Originally posted to "microsoft.public.outlook.general":
I'm use to Thunderbird (TB), where the mail folder tree is
implemented
as a file folder tree outside of the mail reader app. In outlook, I
created a mail folder "Subject1" and put into it messages related to
Subject1. Obviously, I didn't put it where I thought I did; it was
nowhere to be found when I ran into more Subject1 messages later on
in
my Inbox cleaning. In TB, I can use the file search to look for
where
the Subject1 folder resides in my hierarchy. I can't do that in
Outlook. Is there a good alternative?
Using Outlook's advanced search, I found some good subject-line
phrases that located messages in the Subject1 folder. I still didn't
know where in my mail folder hierarchy it resided. Is there a way to
find out where the mail folder resides in the hierarchy from the
messages in the mail folder?
I am using Office 2003
P.S. Why are there two groups, "microsoft.public.outlook" and
"microsoft.public.outlook.general"?
Mon Jul 05 15:54:26 CDT 2010 |
0 |
Mon Jul 05 15:54:26 CDT 2010
by Paul |
- email question
-
Outlook 2007 / Vista Home Premium
Not even certain I know how to ask this one.
I have moved my pst from Outlook on one PC to Outlook on another. Both
are Outlook 2007.
For some reason - maybe by design - my email settings did not accompany
the pst file (although all email messages already received DID transfer).
I set up a new account so I can get email and it works perfectly.
My problem is I now have 2 accounts(?) in the Outlook that my pst was
transferred to - one named as the original pst and one created when I
created a new email account. What I want is one pst with the email
settings associated with it. How do I do this? There is only one
account in Tools|Account Settings and that is the one I created.
Fri Jul 02 13:06:55 CDT 2010 |
1 |
Fri Jul 02 13:06:55 CDT 2010
by J |
- Outlook saves sent messages when it is not supposed to
-
I have Outlook 2003 and Windows Vista.
Under Email options, I=92ve unselected the =93save copies of messages in
Sent Items folder=94
I created a rule to be applied when receiving a message:
If the subject contains vuvuzela, permanently delete the message and
reply using an .oft file.
Then I created a rule to be applied after sending a message:
Move a copy to the Sent Item folder except if the subject contains
vuvuzela
If I send a message with vuvuzela in the subject, the item is not
saved.
However, when replying using the .oft file, it does save the message
in the Sent Items folder.
I can I correct this?
Can it be done using VBA?
Tue Jun 29 15:47:04 CDT 2010 |
3 |
Tue Jun 29 15:47:04 CDT 2010
by Frank |