- Windows Update Does Not Recognize Administrator
-
Vista SP1. I just completed many updates from the Windows update site. With
several non critical ones left, I went back to finish. Now I can't download
/ install because it says I need Administrator permission. I checked user
accounts and of course there is only one account listed and it being
administrator, which I'm logged in on. I tried changing the account and it
recognizes me as an administrator and allowed me to make changes.
Applications requiring administrator work just fine but the update site
does not :( As per an earlier post I read here, I ran Update Agent 3,
still no joy. How can I regain update site permission.
Thanks
Fri Dec 18 20:37:12 CST 2009 |
0 |
Fri Dec 18 20:37:12 CST 2009
by Steve |
Fri Dec 18 14:37:01 CST 2009 |
0 |
Fri Dec 18 14:37:01 CST 2009
by Eva |
Fri Dec 18 14:10:02 CST 2009 |
4 |
Fri Dec 18 14:10:02 CST 2009
by mcsvcs |
- error code 646
-
I have been trying to do the "Update" for several months and it always
failed, to all that posted a solution "THANK YOU" ALL SO VERY MUCH....IT
WORKED I was able to do all 11 updates.....YaHooooooooo
Fri Dec 18 02:52:02 CST 2009 |
1 |
Fri Dec 18 02:52:02 CST 2009
by dilliedallie |
Thu Dec 17 18:58:01 CST 2009 |
1 |
Thu Dec 17 18:58:01 CST 2009
by DesignSolutions |
- Security Updates Fail to Install
-
The following Security Updates contine to fail to install.
Security Update for 2007 Microsoft Office System (KB960003)
Security Update for the 2007 Microsoft Office System (KB969613)
Security Update for the 2007 Microsoft Office System (KB973704)
Does anyone know how to fix this problem.
Thu Dec 17 18:25:01 CST 2009 |
8 |
Thu Dec 17 18:25:01 CST 2009
by tealeaf |
- Windows update scan for new updates always fails (clean XP install) - 0xC80003FA, 0x8024000E,0x800706BE
-
Hi all,
I've been unable to use windows update after a fresh XP SP3 install. This
is a slipstreamed disc & it has been used successfully to reinstall the OS
in the past.
I can connect to windows update, but the scan for new updates always fails
with an error message. I have seen three different error messages
0xC80003FA
0x8024000E
0x800706BE
XP installed without any issues & appears to be otherwise stable. The only
software installed prior to going to windows update was MS Office & Avira
(anti-virus). Negative anti-virus scan. Chkdsk /f /r & Seatools (drive
diagnostic)
both report a healthy drive, with no file system errors or bad sectors.
Since I
can't download windows updates, I did a clean reinstall of xP without
installing
Office & Avira, but still get the same windows update errors.
My initial thought was KB 943144 where SP3 machines couldn't connect to
windows update because Wups2.dll wasn't registered properly. Didn't help.
I also tried registering
regsvr32 wuapi.dll
regsvr32 wuaueng1.dll
regsvr32 wuaueng.dll
regsvr32 wucltui.dll
regsvr32 wups.dll
regsvr32 wuweb.dll
The 0xC80003FA error is discussed in KB 916258. It suggests deleting a
presumably corrupt SoftwareDistribution folder. No change. I also deleted
the temp files, cookies, history & related windowsupdate status key.
I didn't find anything in the KB about the 0x8024000E error. But a Google
search suggested that it might be solved by running system file checker.
Didn't help.
And the 0x800706BE error has hundreds of KB hits, relating to the remote
procedure call (RPC) service. But I didn't see anything specfici to
windows update. I did confirm that the RPC & background intellegent
transfer service were running. One MVP suggested trying changing the RPC
service login from a WINNT system to a local user login, but it didn't
make a difference for me.
My windowsupdate logs are rather large at this point, but what I think are
the relevant portions are appended below.
I would be grateful for any insight into this or suggestions on how to
proceed.
Thanks,
Bernd
--
from WindowsUpdate.log
+++++++++++ PT: Synchronizing server updates +++++++++++
+ ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL =
https://www.update.microsoft.com/v6/ClientWebService/client.asmx
WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7,
soap error code = 300, HTTP status code = 200
WARNING: SOAP Fault: 0x00012c
WARNING: faultstring:Fault occurred
WARNING: ErrorCode:ConfigChanged(2)
WARNING: Message:(null)
WARNING:
Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/SyncUpdates"
WARNING: ID:cf9c9580-1761-43a2-aae4-bf3c6cbfa166
WARNING: DS: Database will be reset next time it starts up due to
0xc80003fa
WARNING: PopulateDataStore failed: 0xc80003fa
WARNING: Sync of Updates: 0xc80003fa
WARNING: SyncServerUpdatesInternal failed: 0xc80003fa
+++++++++++ PT: Synchronizing server updates +++++++++++
+ ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL =
https://www.update.microsoft.com/v6/ClientWebService/client.asmx
WARNING: Cached cookie has expired or new PID is available
Created new random SusClientId 69af5425-1912-4491-ab8d-66c61540e925. Old
Id: 0425944b-b524-4dbf-a50f-7f350ef93172.
WARNING: PopulateDataStore failed: 0x8024000e
WARNING: Sync of Updates: 0x8024000e
WARNING: SyncServerUpdatesInternal failed: 0x8024000e
+++++++++++ PT: Synchronizing server updates +++++++++++
+ ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL =
https://www.update.microsoft.com/v6/ClientWebService/client.asmx
WARNING: Cached cookie has expired or new PID is available
WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7,
soap error code = 300, HTTP status code = 200
WARNING: SOAP Fault: 0x00012c
WARNING: faultstring:Fault occurred
WARNING: ErrorCode:ConfigChanged(2)
WARNING: Message:(null)
WARNING:
Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/SyncUpdates"
WARNING: ID:bba5ef24-9cb0-4e2e-9fc8-6066c0529098
WARNING: PopulateDataStore failed: 0x800706be
WARNING: Sync of Updates: 0x800706be
WARNING: SyncServerUpdatesInternal failed: 0x800706be
Thu Dec 17 16:14:29 CST 2009 |
9 |
Thu Dec 17 16:14:29 CST 2009
by Bernd |
- Stuck on error message 80240016
-
Hi everyone, and thanks for the useful info in this group. I am using
Windows Vista Home Premium and cannot get Windows Updates at present. The
update symbol is permanently in my system tray with the message 'Windows
can't
check for updates'. When I try to run it I get error message 80240016
'Windows Update is currently installing updates. Please try again in a few
minutes'. The 'available update' which claims to be waiting to be installed
is Windows Vista Service Pack 2. It has been stuck like this for weeks, and
always returns the same message. I would be most grateful for any
suggestions as to how to remove this block and get updates running again.
Thanks.
Thu Dec 17 15:09:02 CST 2009 |
4 |
Thu Dec 17 15:09:02 CST 2009
by Ian_M |
- Windows update error
-
I get the follow messege when i try and run a windows update.
Files required to use Windows Update are no longer registered or installed
on your computer. To continue:
Register or reinstall the files for me now (Recommended)
Let me read about more steps that might be required to solve the problem
What to thye mean by redister or reinstall filles. How do i do it?
Thu Dec 17 15:06:08 CST 2009 |
1 |
Thu Dec 17 15:06:08 CST 2009
by Adam |
Thu Dec 17 09:58:01 CST 2009 |
6 |
Thu Dec 17 09:58:01 CST 2009
by FCAMPBELL01friends |
- Trouble downloading update KB953297
-
The automatic update on my computer keeps telling me that this upgrade is
ready to download, but every time I try to download it, it fails. When I
check for updates on the Microsoft website, it lists this update as an
option, but the size of the file is shown as 0KB. My computer has failed to
download this update 20 times already this month. How do I get it to stop
trying to download an update that has nothing in it?
Thu Dec 17 09:16:02 CST 2009 |
2 |
Thu Dec 17 09:16:02 CST 2009
by rbrandt172 |
- My comp cuts off every 15 minutes after I install "important" upda
-
I know that there may be 1000 people on here who have already asked this
question, but in my case, I don't have the time to search for that answer.
The reason I don't have time is this... For about the past 5 years, I have
owned 3 different comps, and have had XP or Vista running on them. Every
time I install the updates for my system, or I let the system update
automatically, every 15 min. after the updates take effect,WITHOUT FAIL, my
computer restarts itself!! I will then go into the control panel and
completely reset my comp back to the last checkpoint that was made before the
auto update. I have tried every single thing conceivable to remedy this! I
am by no means computer illiterate, but this is killing me here!! So now, I
never allow my computer to update, and that keeps my computer on when I need
it to be. My wife's family has a friend, that's an IT guy, that sets up the
comp networks for large businesses. This guy's entire life is dedicated to
setting up, and maintaining large comp networks, and when he came to my home
and I showed him the whole process, he had no idea what was causing it. He
went so far as to take my comp for 4 days, back to his home to figure it out
and he couldn't!! So I'm hoping there is someone on this website that knows
more than him, and can give me some type of solution for this problem, or can
at least tell me I'm out of luck and never install updates on my computer!!
hahaha Thanks!!!!!!!!
Thu Dec 17 00:48:01 CST 2009 |
3 |
Thu Dec 17 00:48:01 CST 2009
by miked9746 |
- Failed windows update - KB976884 and KB976416
-
Automatic windows update failed to install the above two updates. Error code
646 came up.
I downloaded the two updates from Microsoft website and tried manual install
and the result is same with error code 646 and the message 'this package
failed to install'.
I have vista business and MS Office 2007. The above two updates are related
to MS Office 2007 (Infopath 2007 and Outlook 2007)
I hope some one can come up with a solution or probably already has one?!! I
ended up going round and round on the web and also on microsoft website.
Thanks in advance.
Wed Dec 16 16:03:02 CST 2009 |
1 |
Wed Dec 16 16:03:02 CST 2009
by curiousoffice |
- Handler already exists error
-
When trying to load certain pages the status bar indicates DONE with errors.
When I look at the error it states handler already exists. ???? Help???
Wed Dec 16 14:53:02 CST 2009 |
2 |
Wed Dec 16 14:53:02 CST 2009
by Kimy |
- WU on Win 2003 fails with 0x800706b5
-
I attempt to run Windows Update on a Win 2003 SP2 server. The home page
displays successfully. At that point, whether I click on "Express" or
"Custom" the next page displayed says -
"The website has encountered a problem and cannot display the page you are
trying to view. [Error number: 0x800706b5]"
I've searched the Internet for cases where this particular error is returned
by WU, but none of them resolve the problem in our situation.
Reviewing "WindowsUpdate.log" confirms that all WU components have the most
current version (7.4.7600.226).
Below, I have pasted in an excerpt of the "WindowsUpdate.log" entries that
report the error we encounter -
=====================================================
2009-12-16 12:42:47:565 3232 1c3c COMAPI -------------
2009-12-16 12:42:47:565 3232 1c3c COMAPI -- START -- COMAPI: Search
[ClientId = WindowsUpdate]
2009-12-16 12:42:47:565 3232 1c3c COMAPI ---------
2009-12-16 12:42:47:581 856 5f4 Service WARNING: GetUserTokenFromSessionId
failed with error 800706b5 for session 0
2009-12-16 12:42:47:581 3232 1c3c COMAPI WARNING: Unable to listen to
self-update/shutdown event (hr=0X800706B5)
2009-12-16 12:42:47:581 3232 1c3c COMAPI WARNING: Unable to establish
connection to the service. (hr=800706B5)
2009-12-16 12:42:47:581 3232 1c3c COMAPI - WARNING: Exit code = 0x800706B5
2009-12-16 12:42:47:581 3232 1c3c COMAPI ---------
2009-12-16 12:42:47:581 3232 1c3c COMAPI -- END -- COMAPI: Search
[ClientId = <NULL>]
2009-12-16 12:42:47:581 3232 1c3c COMAPI -------------
2009-12-16 12:42:47:581 3232 1c3c COMAPI FATAL: Unable to initiate
asynchronous search, hr=800706B5
=====================================================
If you have any information that might help resolve the problem, please let
me know.
Thank you.
James Troy
Wed Dec 16 12:09:01 CST 2009 |
4 |
Wed Dec 16 12:09:01 CST 2009
by JamesWTroy |
- Win 2008 x64 hangs up installing KB970430
-
I have an hyper-v virtual server (win 2008 x64 enterprise) with iis and
multiple ip addresses.
After installing the following updates:
KB970430
KB971737
KB973917
KB890830
the system stop during reboot (the screen keeps showing update 0% 3/3).
I tried to restart a clean backup copy of the virtual machine and tried to
reinstall the updates and find out that I got the same problem with KB970430
only.
Stopping the machine and restarting it in safe-mode, installation completes
but starting again, several services do not start, I can't open internet
explorer, network properties and some other windows, the network trayicon
shows that the network is connected but I can still ping another host...
Wed Dec 16 11:07:01 CST 2009 |
2 |
Wed Dec 16 11:07:01 CST 2009
by libonis |
- Update for Windows XP (KB955759) Failed installation
-
Ran into an application hang while in facebook.... have encounted several
while there. Have tried loading the Update for Windows XP (KB955759)
as it instructs me to do..... perhaps to fix problem. but after several
attempts to load application it fails. Any assistance Anyone??????
Have followed all the instructions that Microsoft Windows Error Reporting
has shown me to try to correct problem..
Wed Dec 16 02:34:01 CST 2009 |
1 |
Wed Dec 16 02:34:01 CST 2009
by cabbage24 |
- Error code 646
-
My computer keeps wanting to install the Security Update for Microsoft Works
8 (KB977304) but my computer keeps failing. Is there someplace where i can
manually install this update to my computer.
Tue Dec 15 22:56:01 CST 2009 |
6 |
Tue Dec 15 22:56:01 CST 2009
by Cathy |
- updater in system tray disappears
-
Windows XP SP3, IE7
When the icon for windows tray appears telling me I have updates, I
click on it, chose custom, and chose the updates I wish to install. It
starts downloading the updates, and the icon disappears, but never comes
back to let me install the updates. -- Even if I reboot.
So if I go into IE and choose Windows Update tool, I select the updates
I want. After these have downloaded again, all of a sudden the icon
appears again in the system tray, like, oh -- I forgot -- you can
install these updates now.
At this time I usually just let IE7 install the updates.
This is mostly a minor annoyance, but just curious, as to what could be
causing this behavior.
Tue Dec 15 21:56:06 CST 2009 |
2 |
Tue Dec 15 21:56:06 CST 2009
by Jim |
- Help Needed for windows Vista after a Update was downloaded
-
Hi,
Hoping someone can help me...
I tried downloading a microsoft "update" a few days ago, I dont remember
what the update was for, just that the size of it was over 700 ..
In the middle of the download, it said I didnt have enough space.. yet it
continued to download what it could.
At the end of it, it said that there was 1 other component that needed to
download, yet failed.. and to try again.
At which point, I did, and it said it was successful..
yet, after rebooting the system, it hangs and when I try and do anything
word, or other.. it comes up with a error message that says "Windows
Installer (or could be) Windows update explorer has stopped, this window will
close out"
At which point you have a choice to close it or x out of it and try and
continue to work..
Problem is.. the error msg keeps coming back up
I am running windows vista on a laptop.
Service Pack 2
Any Suggestions would greatly be apprciated!
Thank you... Susan
Tue Dec 15 15:18:01 CST 2009 |
1 |
Tue Dec 15 15:18:01 CST 2009
by Susan |
- KEEP GETTING THIS ERROR MESSAGE Error Code: 0x643
-
This frame work security option will download but wont install need some help
on it
Microsoft .NET Framework 1.1 Service Pack 1 Security Update for Windows
2000, Windows XP, Windows Vista, Windows Server 2008, Windows 7, and Windows
Server 2008 R2 (KB953297)
Tue Dec 15 12:55:07 CST 2009 |
1 |
Tue Dec 15 12:55:07 CST 2009
by MIKEYTOMMY |
- error code 0x8007fof1
-
i cant install this update, update for background intelligent transfer
service(BITS) 2.0 and WIN HTTP 5.1 (KB842773)
Tue Dec 15 07:29:02 CST 2009 |
1 |
Tue Dec 15 07:29:02 CST 2009
by TASHS |
- Server 2003 update problem
-
This server is running server 2003 sp2, hasn't been updated in quite a while,
was a terminal server but not any more. When I run windows update it wants to
install a new version of update. It fails with error 0x8024D007. I tried a
few troubleshooting steps I found online without success. One of these was to
unregister and re-register wuaueng.dll. It will not re-register, gives the
message "dllregisterserver in wuaueng.dll failed. Return code was
0x80070514". I renamed this dll and it was recreated but still the same
error. I expanded the dll from the 2003 disk to the system32 folder but it
still will not register. The automatic update service doesn't exist any more
as a result.
I ran sfc /scannow which made no difference.
Tue Dec 15 05:43:01 CST 2009 |
7 |
Tue Dec 15 05:43:01 CST 2009
by kc66 |
- Update won't install
-
The following will not install. Anyone know why?
Update for Microsoft Office InfoPath 2007 (KB976416)
Installation date: â??12/â??14/â??2009 8:18 PM
Installation status: Failed
Error details: Code 646
Update type: Important
Microsoft has released an update for Microsoft Office InfoPath 2007. This
update provides the latest fixes to Microsoft Office InfoPath 2007.
Additionally, this update contains stability and performance improvements.
More information:
http://support.microsoft.com/kb/976416
Help and Support:
http://support.microsoft.com/?LN=en-us
Mon Dec 14 22:26:01 CST 2009 |
1 |
Mon Dec 14 22:26:01 CST 2009
by MegMackay |
- SP3 for Windows XP Failed
-
In reviewing my Windows Update History, I find that Windows XP Service Pack 3
Failed on 08 21 2008, but several Service Pack 3 Updates have downloaded
since that date. Two Questions: 1) Why did the SP3 Update Fail, and 2) Why
are the updates downloading and installing even though the Service Package
Failed? This does not make sense. I just tried again to install it and it
stopped downloading. Why?
Mon Dec 14 15:55:02 CST 2009 |
2 |
Mon Dec 14 15:55:02 CST 2009
by tkb656 |
- Windows 7 64-bit Office Update in Windows Update
-
I have a new install of Windows 7 64-bit Home Premium.
I have Windows Update running fine for Windows itself.
I have installed Word & Excell from Office 2007, and have (with considerable
effort) located the latest updates for them.
At work, on Vista or Windows 7 Professional, the Office Update/Microsoft
Updates are integrated with Windows Update, and happen concurrently - a
single "check for updates" scans for all, and automatic updates picks up all.
NOT so here at home... I cannot persuade Windows Update applet to show any
interest in Office. When I click the "find out more" button, I get a "needs
administrator privileges" error in IE8; if I disable UAC, I get the web-page
for Windows Update (tells me I'm up to daye) with the tab for Office Updates,
but that just shows up the useless "what people are downloading" - no
priority for or gathering together of the real important security updates.
What on earth do I have to do to integrate Office Update into the Windows
Update applet?
Mon Dec 14 12:16:03 CST 2009 |
6 |
Mon Dec 14 12:16:03 CST 2009
by NeilTaylor |
- XP and Office 2003 Updates
-
On Dec 9th, I got 9 overnight automatic updates installed for XP and Office
2003. The very next morning, my wireless adapter froze. I inserted the
driver disk to reinstall, but found my CD/DVD drive wasn't working either.
And I couldn't even get the computer to shut down. A hard reboot gets it all
working again, but only for about 6 to 8 hours, then they freeze up again
(or maybe it is caused by a few hours of inactivity). Downloaded the latest
driver for the D-Link wireless adapter and reinstalled it, but to no avail.
I've also got a few messages about "Window not being able to initialize the
application." (Not sure which app it was refering too.)
What happened with these updates that broke everything? Is there a fix?
--
Bob
Mon Dec 14 11:58:01 CST 2009 |
1 |
Mon Dec 14 11:58:01 CST 2009
by me |
- comments
-
I am unable to comment on others proiles -spacing is all wrong
Mon Dec 14 07:18:01 CST 2009 |
1 |
Mon Dec 14 07:18:01 CST 2009
by lorri |
- Vista Ultimate 64-bit SP2: Automatic Downloads stall on shutdown
-
This is the second time this has happened. I reformatted and reinstalled
everything the first time, and am not willing to do this again.
When Vista automatically downloads updates, I find that when I
shutdown/restart, I get the message "Please do not shutdown or unplug your
computer. Installing update 1 of XX .."
The computer has stayed on this message for as long as 12 hours (it started
when I left this morning and was still showing the same message when I came
home), with the ".." moving thru its stages as expected. I had to force
shutdown on my computer and cannot install any new programs or updates at
all, now.
Does anyone know why the automatically downloaded updates are stalling, and
how to fix/address this problem?
--
When failure is not an option, success is inevitable.
Sun Dec 13 21:27:01 CST 2009 |
0 |
Sun Dec 13 21:27:01 CST 2009
by kenmcelhotmailcom |
- Can't log into admin profile
-
I was prompted to install an update to my Win7 machine. After restarting, I
find that my password won't work and I cannot log on to the admin profile of
my computer. What do I need to either fix this problem or return to my
previous configuration ?
Sun Dec 13 19:55:02 CST 2009 |
0 |
Sun Dec 13 19:55:02 CST 2009
by GregT |
- Error msg 80070103 on NVIDIA update and then can find monitor deta
-
I accepted Service pack 2 updates (using Vista) and also accepted optional
updates on NVIDIA. After restart it gives error 80070103 against a failed
update for NVIDIA Geoforce, and the monitor settings are all for "default
monitor". I have no way of finding the actual monitor settings (Iiyama
ProLite) as they don't appear anywhere on hardware etc in control panel. I
have tried disconnecting the monotor and hopin it will reset as plug and play
but it won't. How do I get the system to recpognise the right monitor and
have the right drivers?
--
GH
Sun Dec 13 12:57:01 CST 2009 |
6 |
Sun Dec 13 12:57:01 CST 2009
by GrahamH |
- Service Pack 2 (KB948465) will not update
-
Windows Vista Service Pack 2 (KB948465)
Installation date: â??12/â??13/â??2009 12:42 PM
Installation status: Failed
Error details: Code 80004005
Update type: Important
Windows Vista Service Pack 2 is an update to Windows Vista that includes all
of the updates that have been delivered since Service Pack 1, as well as
support for new types of hardware and emerging hardware standards. After you
install this item, you may have to restart your computer. This update is
provided to you and licensed under the Windows Vista License Terms.
More information:
http://support.microsoft.com/kb/948465
Help and Support:
http://technet.microsoft.com/en-us/windows/dd767387.aspx
Sun Dec 13 12:47:01 CST 2009 |
3 |
Sun Dec 13 12:47:01 CST 2009
by Tiff |
- Monitor doesnt work after windows update
-
I was installing an update and left- when i came back my computer was off and
when i restarted it asked if i wanted to run sfe mode or regular- i chose
regular and when the screen came back on it was blank except for the mouse
arrow.(which moves) when i go back into safe mode the same thing happens--
my moniter shows the screen saver- which i had tuned off- and when i move the
mouse it turns off but nothing comes n screen except the mouse arrow--
help??? please?
Sun Dec 13 06:06:01 CST 2009 |
4 |
Sun Dec 13 06:06:01 CST 2009
by gsgurch |
- upgrading window vista 32 bit in windows vista ultimate or window
-
sir , i have hp pavilian note book 6502au and in this i got window vista home
premimum 32 bit for operating system now i like to upgrade it in windows
vista ultimate or windows 7. please what upgrading options i can have ? and
what i have to pay for it ? what will paymeant mode ? where i can upgrade it ?
Sat Dec 12 22:56:01 CST 2009 |
2 |
Sat Dec 12 22:56:01 CST 2009
by shashi |
- assistance with error 0x8024d007
-
Hi - I'm getting an error, where WU fails just after you click the Express
or Custom buttons.
I get error 0x8024d007. I did a little research, which let me to the
Hkey_Classes_Root registry key.
I checked that permissions were "full" for system and administrators (OK).
Next I deleted \windows\softwaredistribution and allowed WU to recreate it.
Neither solution has resolved the problem. I looked in Windowsupdate.log
and see these errors. I don't know if these problems are the cause or not.
Any advice
appreciated.
2009-12-12 18:48:47:265 1004 13c Agent Downloading new auth cab for service
7971f918-a847-4430-9279-4a52d1efe18d at
http://download.windowsupdate.com/v9/microsoftupdate/redir/muauth.cab
2009-12-12 18:48:47:265 1004 13c Misc Validating signature for
C:\WINDOWS\SoftwareDistribution\AuthCabs\authcab.cab:
2009-12-12 18:48:47:281 1004 13c Misc Microsoft signed: Yes
2009-12-12 18:48:47:296 1004 13c Misc Validating signature for
C:\WINDOWS\SoftwareDistribution\AuthCabs\authcab.cab:
2009-12-12 18:48:47:312 1004 13c Misc Microsoft signed: Yes
2009-12-12 18:48:47:312 1004 13c Misc Validating signature for
C:\WINDOWS\SoftwareDistribution\AuthCabs\authcab.cab:
2009-12-12 18:48:47:312 1004 13c Misc Microsoft signed: Yes
2009-12-12 18:48:47:328 1004 13c Agent WARNING: Failed to register auth cab
for service 7971f918-a847-4430-9279-4a52d1efe18d, error = 0
2009-12-12 18:48:47:328 1004 13c Agent FATAL: Caller Default Service
Recovery failed to opt in to service 7971f918-a847-4430-9279-4a52d1efe18d,
hr=0X80040154
2009-12-12 18:48:47:500 1004 13c Misc Validating signature for
C:\WINDOWS\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77
\muv4wuredir.cab:
2009-12-12 18:48:47:500 1004 13c Misc Microsoft signed: Yes
2009-12-12 18:48:47:546 1004 13c Misc Validating signature for
C:\WINDOWS\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77
\muv4wuredir.cab:
2009-12-12 18:48:47:546 1004 13c Misc Microsoft signed: Yes
2009-12-12 18:48:47:562 1004 13c PT +++++++++++ PT: Synchronizing server
updates +++++++++++
2009-12-12 18:48:47:562 1004 13c PT + ServiceId =
{9482F4B4-E343-43B6-B170-9A65BC822C77}, Server URL =
https://www.update.microsoft.com/v6/ClientWebService/client.asmx
2009-12-12 18:48:47:843 1004 13c PT WARNING: PopulateDataStore failed:
0x80040154
2009-12-12 18:48:47:843 1004 13c PT WARNING: Sync of Updates: 0x80040154
2009-12-12 18:48:47:843 1004 13c PT WARNING: SyncServerUpdatesInternal
failed: 0x80040154
2009-12-12 18:48:47:843 1004 13c Agent * WARNING: Failed to synchronize,
error = 0x80040154
2009-12-12 18:48:47:859 1004 13c Report WARNING:
CEventNamespaceDefinition::Init failed = 80040154.
2009-12-12 18:48:47:859 1004 13c Report WARNING: InitReportingComponents
failed: 80040154
2009-12-12 18:48:47:859 1004 13c Agent * WARNING: Exit code = 0x80040154
2009-12-12 18:48:47:859 1004 13c Agent *********
2009-12-12 18:48:47:859 1004 13c Agent ** END ** Agent: Finding updates
[CallerId = WindowsUpdate]
2009-12-12 18:48:47:859 1004 13c Agent *************
2009-12-12 18:48:47:859 1004 13c Agent WARNING: WU client failed Searching
for update with error 0x80040154
2009-12-12 18:48:47:875 2044 e54 COMAPI >>-- RESUMED -- COMAPI: Search
[ClientId = WindowsUpdate]
2009-12-12 18:48:47:875 2044 e54 COMAPI - Updates found = 0
2009-12-12 18:48:47:875 2044 e54 COMAPI - WARNING: Exit code = 0x00000000,
Result code = 0x80040154
2009-12-12 18:48:47:875 2044 e54 COMAPI ---------
2009-12-12 18:48:47:875 2044 e54 COMAPI -- END -- COMAPI: Search
[ClientId = WindowsUpdate]
2009-12-12 18:48:47:875 2044 e54 COMAPI -------------
2009-12-12 18:48:47:875 2044 e80 COMAPI WARNING: Operation failed due to
earlier error, hr=80040154
2009-12-12 18:48:47:875 2044 e80 COMAPI FATAL: Unable to complete
asynchronous search. (hr=80040154)
Sat Dec 12 21:14:35 CST 2009 |
2 |
Sat Dec 12 21:14:35 CST 2009
by davexnet |
- sp3
-
Update quits at 'Checking product key'. doesn't freeze, just quits on
'Inernal error"
have MS case number, but the guy is stumped.
we deleted oem.inf files. al kinds of stuff.
same thing.
pc has loaded a lot of other updates in the last 2 wks that are later
than SP3.
should i dump them all and retry??
thanx
Sat Dec 12 18:01:02 CST 2009 |
6 |
Sat Dec 12 18:01:02 CST 2009
by plugginaway |
- Windows Vista Updated, Can't turn on Computer
-
I run Windows Vista Ultimate on my desktop Inspiron 530S, if this is helpful.
My computer rebooted this morning to install updates and turned on, but was
slow so i restarted. Later I turned it off and now when I turn it back on it
goes to Configuring Updates 3/3 0% even though it just updated....
after a few moments it will go to the shutting down screen, shut itself down
then turn itself back on and repeat the whole thing, configuring updates 3/3,
shutting down, etc etc etc.
Sat Dec 12 16:33:01 CST 2009 |
7 |
Sat Dec 12 16:33:01 CST 2009
by AnnieD |
Sat Dec 12 15:58:01 CST 2009 |
2 |
Sat Dec 12 15:58:01 CST 2009
by boomer |
- MBSA and Microsoft Update want .NET update - II
-
XP Pro SP3
> Windows version?
>
> kakii wrote:
> > MBSA claims following rollup or service pack is missing on this
> > machine
> > KB 951847 - something like .net 3.5sp1 and .net 3.5 update
> > Also the Microsoft Update is claiming
> > KB 951847 is missing
> >
> > I'm sure the .NET component is not installed on this system.
> > How get I rich from these notifications?
> > .NET-free windows-based PC is
Sat Dec 12 02:45:57 CST 2009 |
2 |
Sat Dec 12 02:45:57 CST 2009
by kakii |
- error 0x800C0002 while updateing win2k
-
Ok so I like my win 2k and I write on a stone tablet too<G> but upon trying
to update my new install of win2k I get this error and it will not up date.
Is win 2k now cut off? is that my problem? what does this mean in this
application. Pete
Fri Dec 11 22:08:01 CST 2009 |
1 |
Fri Dec 11 22:08:01 CST 2009
by behindthetimespete |
- NTVDM.exe CPU has encountered an illegal instruction
-
All dos programs were working including DOS programs. But after updatin
XP, These programs doesn't work. It shows NTVDM.exe CPU has encountere
an illegal instruction. Can anyone sugest a solution for this problem
CMD and windows ftp works. Turbo C++ 3.1 now it doesn't work. It was al
working, but stoped with windows update. Please help
Ale
--
amamprayi
-----------------------------------------------------------------------
amamprayil's Profile: http://forums.techarena.in/members/163085.ht
View this thread: http://forums.techarena.in/windows-update/1281428.ht
http://forums.techarena.i
Fri Dec 11 17:20:23 CST 2009 |
0 |
Fri Dec 11 17:20:23 CST 2009
by amamprayil |
- RAS System Error = 1060
-
When I closed down my desktop on 9.12.09 (running XP Home) Windows
automatically downloaded updates before shutting down itself.
When I try to access the internet I get the following message "RAS System
Error = 1060".
I now cannot access the internet and appear to have lost all entries in my
"Network Connections" folder.
Can anyone please help?
Fri Dec 11 16:02:01 CST 2009 |
0 |
Fri Dec 11 16:02:01 CST 2009
by tennents8 |
- Update KB973904 keeps getting cancelled
-
Yesterday I noticed disk activity on my PC and guessed that it was
applying updates. After it quieted down I logged onto my Administrator
account to check (I like to see what's been updated), and sure
enough there had been updates. But what was listed (after going
to Microsoft Update Home and clicking "Review your update history")
was four successful updates and then one, KB973904, with a grey
circle in the Status column, meaning Cancelled.
This I haven't seen before! There were also several High Priority
updates which hadn't been applied, and I noticed the little yellow
shield on the task bar at the bottom right of the screen telling
me that "Updates are ready for your computer". So I clicked on
the yellow shield, and the update process started again, and when
it was done there was a second cancelled KB973904 entry, and none
of the remaining updates had been applied.
So I left it at that yesterday, and when I turned on my computer
today I noticed more disk activity, and when I checked for updates
the only new entry was a third cancelled KB973904. So it's starting
to look like a problem! Anyone have any idea what is going on?
For the record, my OS is WinXP SP3, I'm using Microsoft Update (as
opposed to Windows Update), the updates that were applied successfully
yesterday were KB890830, KB971737, KB974392, and KB976416, and the
updates that remain unapplied are KB973904, KB976325, KB970430,
KB974318, KB955759, and KB976884.
--
John Brock
jbrock@panix.com
Fri Dec 11 15:46:26 CST 2009 |
1 |
Fri Dec 11 15:46:26 CST 2009
by jbrock |
- Windows update error's
-
I just reformatted and i cant install any service packs / or even do ON
update yet..windows update does not work i fixed one error already no
im at error Code 80072EFE and i need to fix it to update m
computer...*i cant download ANYTHING from microsoft.com either*..i can
get any service packs or anything i need...help please
--
invert3
Posted via http://www.vistaheads.co
Fri Dec 11 15:00:40 CST 2009 |
6 |
Fri Dec 11 15:00:40 CST 2009
by invert35 |
- Error code 80071A91
-
After using my Windows recovery software Windows Update will not update
itself. I get this error code.
Fri Dec 11 13:45:01 CST 2009 |
3 |
Fri Dec 11 13:45:01 CST 2009
by trooper |
- Windows update solution
-
I found thins solution to the Windows update from dipswitch's post. It has
worked for me. Hope this helps some of you.
http://msdn.microsoft.com/en-us/library/aa387285(VS.85).aspx. Direct URL's:
WSUS here is distributing 7.4.7600.226 since the last few days
x86:
http://download.windowsupdate.com/windowsupdate/redist/standalone/7.4.7600.226/windowsupdateagent30-x86.exe
x64:
http://download.windowsupdate.com/windowsupdate/redist/standalone/7.4.7600.226/windowsupdateagent30-x64.exe
Itanium:
http://download.windowsupdate.com/windowsupdate/redist/standalone/7.4.7600.226/windowsupdateagent30-ia64.exe
Fri Dec 11 12:58:02 CST 2009 |
3 |
Fri Dec 11 12:58:02 CST 2009
by Viola |
- Should I update?
-
I just got a T60P Lenovo factory refurb preloaded with XP Pro SP3.
I went to the update site and got a huge update that said it would catch up
everything to date.
Back at the update site it shows 20 or 30 additional updates.
Do I really need to do all those?
--
For most of us the most danger is most politicians.
JimL
Fri Dec 11 12:25:01 CST 2009 |
1 |
Fri Dec 11 12:25:01 CST 2009
by JimL |
- Windows update site not working
-
On one computer I get the error:
The instruction at "0x06e80068" referenced memory at "0x06380068". The
memory could not be "written".
On the other computer I get the error:
403 - Forbidden: Access is denied.
I have checked the troubleshooting for Windows update and didn't find any
reference to these problems.
Has anyone experienced these problems before and have solutions?
--
Nancy
Network Analyst II
Fri Dec 11 11:12:02 CST 2009 |
10 |
Fri Dec 11 11:12:02 CST 2009
by Nancy |
- Says I am not the administrator
-
I have Vista and it updates ok via the windows update but I get
an error when I try to access the microsoft update web site.
I want to update my office suite 2007 as well as my O/S all at the same time
but
the microsoft site keeps telling me I have to have administrator authority to
enter the site despite me being the only user and administrator on my machine.
Any Ideas?
I use another machine with XP and it accesses the website ok so it is
obviously a problem with the Vista O/S.
Any help is much appreciated.
Fri Dec 11 10:55:01 CST 2009 |
1 |
Fri Dec 11 10:55:01 CST 2009
by Chris |